[andru1973]

hello everyone, I also have a problem that I only know how to solve, I have the rtl2002 probe bought from aliexpress is the one with the gold plate with chiperssAN21131QC, my car renault laguna 3 2008 works perfectly, if I test a megane 3 2015,see the car, see everything and when I give an injection test for example, here the communication with the car is lost.I tried all the variants of can clip v172 up to 205.I don't know which version of the video clip to install, someone has a good version, no bugs

[DWT]

hello everyone, I also have a problem that I only know how to solve, I have the rtl2002 probe bought from aliexpress is the one with the gold plate with chiperssAN21131QC, my car renault laguna 3 2008 works perfectly, if I test a megane 3 2015,see the car, see everything and when I give an injection test for example, here the communication with the car is lost.I tried all the variants of can clip v172 up to 205.I don't know which version of the video clip to install, someone has a good version, no bugs

You can use any version of the program up to and including 214, but I think the same result will not change. in your place, I would take care of the device itself: I would wash the board from the flux, solder it again and wash it again, compare the board with the original photo on the Internet - the Chinese often confuse SMD parts in places, the wires would ring, also for stable operation people often discard the round connector altogether and solder the cable wires directly to the probe board. It's not easy, but it has to be done.

[nicu1202]

Try v202.Works very well.

[andru1973]

You can use any version of the program up to and including 214, but I think the same result will not change. in your place, I would take care of the device itself: I would wash the board from the flux, solder it again and wash it again, compare the board with the original photo on the Internet - the Chinese often confuse SMD parts in places, the wires would ring, also for stable operation people often discard the round connector altogether and solder the cable wires directly to the probe board. It's not easy, but it has to be done.

I took pictures on the board, it seems to be well done, as I said before the problem is with the cars after 2010 (I say I didn't do a test on newer ones only one from 2015) 2011,12,13,14, etc, I didn't do it , I tend to believe that the software is not well hacked, as I said before my car works perfectly without problems and without losing the connection

[andru1973]

after version 210 if I'm not mistaken it only works with rtl2002 chinese clone I tried all versions up to 215 does not see the rtl 2002 probe I did everything possible, does not see the probe

[sabian]

The last version that work with rtl2002 is v214 i have test my self.Try before unistall clip to uninstall first from device manager the driver for rlt2002 and then uninstall clip, reeboot and clean with ccleaner and then install last version v214 that work with rtl2002