Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ZBE4 Controller flash for F10 EVO retrofit
20-05-2022, 09:16 AM,
Post: #11
RE: ZBE4 Controller flash for F10 EVO retrofit
(20-05-2022, 08:08 AM)RuleNormaliai Wrote:  use F3x FA, because F1x never had EVO, so it will not calculate you ZBE4.

Thank you for answering smile

Now it is look like that. Just one SWFL and BTLD needed to be flashed. I replaced the


Attached Files Thumbnail(s)
   
Quote this message in a reply
20-05-2022, 09:24 AM,
Post: #12
RE: ZBE4 Controller flash for F10 EVO retrofit
That's so right.

under If my post helped you hit the thanks and reputation button. Thank you. yes

Quote this message in a reply
20-05-2022, 20:27 PM,
Post: #13
RE: ZBE4 Controller flash for F10 EVO retrofit
What am I missing?


Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2022/05/20-21:37:54.101
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[ZBE4 - 67] prepareECUforFlash started [PROGRESS]
[] SVK-Ist does not match expected SGBMIDs for ecu ECUId:ZBE4_0x67. Excpected (relevant process classes only): [hwap_00002310-255_255_255, btld_000030be-002_011_000, hwel_0000230f-002_001_001], Actual (relevant process classes only): [hwap_00002310-255_255_255, hwel_0000230f-002_001_001, btld_000030be-002_010_000], Missing SGBMID(s): [btld_000030be-002_011_000], Surplus SGBMID(s): [btld_000030be-002_010_000] [THROWABLE]
[ZBE4 - 67] There was an error during TAL execution, please check the log files. [WARN]
[ZBE4 - 67] - [Exception - ZBE4 - 67] SVK-Ist does not match expected SGBMIDs for ecu ECUId:ZBE4_0x67. Excpected (relevant process classes only): [hwap_00002310-255_255_255, btld_000030be-002_011_000, hwel_0000230f-002_001_001], Actual (relevant process classes only): [hwap_00002310-255_255_255, hwel_0000230f-002_001_001, btld_000030be-002_010_000], Missing SGBMID(s): [btld_000030be-002_011_000], Surplus SGBMID(s): [btld_000030be-002_010_000]
[ZBE4 - 67] finalizeECUFlash started [PROGRESS]
[ZBE4 - 67] finalizeECUFlash finished [PROGRESS]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "1min 6s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.


Attached Files
ZBE4.rar
File Type: .rar
Downloaded: 7 times
Size: 3.8 KB

Quote this message in a reply
21-05-2022, 05:17 AM,
Post: #14
RE: ZBE4 Controller flash for F10 EVO retrofit
Wrong istep shipment , play with your dates and re calculate soll and tall


WhatsApp +23058079499
MGU Virginise + FSC / KAFAS 4 Virginise
Secure Coding NCD 2.0
Road Maps Available Middle East/Africa/Israel Evo/Live/JOY
Region Change ID7/ID8
ISTA SQLiteDB FR_4.44.12/4.44.20
Carplay Activations - Evo ID6/Entrynav2/MGU + Android Auto
ID4 to ID5/6 Flash , Software Flashes ( Splitscreen to Fullscreen Carplay )
FSC Map Activation , FSC Repair Kit, Service History, KAFAS FSC
Remote coding 
Visit this user's website
Quote this message in a reply
21-05-2022, 08:23 AM,
Post: #15
RE: ZBE4 Controller flash for F10 EVO retrofit
You need to press the button repeatedly for zbe4 to show up in the e-sys tree with the zgw/fem bench. Then calculate tal and flash with Fa F30 (press button continuously during flash).

- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- ID8.5 (SFA) conversion/ change region map.
- Virgin Kafas4, MRR, RAM used.
- Mgu patch, fsc custom match to vin, remove CP.
- Reset ISN 7DTC, 8HP for F, G serie (include EGS7).
- Write ISN MG1/MD1 with remotely.
- Carplay/Android Auto MGU with/without ATM (6AE).
Skype live:laquangksxd
Quote this message in a reply
[+] 1 user says Thank You to laquangksxd for this post
21-05-2022, 11:26 AM,
Post: #16
RE: ZBE4 Controller flash for F10 EVO retrofit
(21-05-2022, 08:23 AM)laquangksxd Wrote:  You need to press the button repeatedly for zbe4 to show up in the e-sys tree with the zgw/fem bench. Then calculate tal and flash with Fa F30 (press button continuously during flash).

Thank you for helping
Yes I know that already when I have it on the benchsmile
It was my fault. I decided to not flash the btld. That was the problem.
Now it is flashed and works fine. Don't know about the hand writing yet.
Quote this message in a reply
[+] 1 user says Thank You to alsamaraee for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Car Systems / Custom Retrofit Garage ENBT Adapter Ulsmak 33 1,415 Yesterday, 00:17 AM
Last Post: painsage
  G30 LCI Headlights retrofit: High Beam Laser light locking active tcp443 19 3,197 26-03-2024, 21:25 PM
Last Post: Satia
  G05 KAFAS4 enable code missing after Retrofit ACC 6ergsm 19 2,276 26-03-2024, 12:33 PM
Last Post: Hodgsonp
XZBMW Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA FSCmap 183 51,498 25-03-2024, 18:58 PM
Last Post: DayvG
  F15 6WB Retrofit VIN Error moreply 4 174 25-03-2024, 07:24 AM
Last Post: RuleNormaliai
  MGU G30 retrofit , PDC does not show laso 3 168 24-03-2024, 14:35 PM
Last Post: laso
XZBMW E84 X1 25d with 8hp45x how to flash Alp*na or other EGS hasn38 0 85 23-03-2024, 00:26 AM
Last Post: hasn38
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 319 22-03-2024, 12:55 PM
Last Post: Node
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,458 22-03-2024, 11:47 AM
Last Post: urgi
XZBMW BMW F01 Pre-LCI NBT EVO Retrofit Satia 3 211 21-03-2024, 12:53 PM
Last Post: Satia

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content