[loki954]

as i say many times here : you need to make proper assessment of your problem your car will never start...does not mater how many files you will try unless you fix camshaft sensor first ..... and as a guessing from the other dtc you are missing a supply somewhere

[bboctavian]

Thanks for the tips loki, the story about this is a little big.. i manage to put the engine on a jeep 4x4 and i make all the wiring, and all is good so far, but i will try to search again about camshaft sensor and about that supply.. (when i power the pin 26 Voltage Supply Terminal 15 from X60004 the fuel pump start and work the diagnostic )

try using ms4x flasher to write back. i hear sometimes jmgarage flasher is not working well.

thanks i will try with ms4x flasher (the think is when i read it back with jmgarage is the same software like the one i write)

[bboctavian]

Sorry for double post.

I write the original file on the ecu and mount the ews on the car and car start !!!
is a problem in immo file...