[xameleon]

need help with 2 things

I try to make a dump for clearing crash data
Accidentally use wrong wiring on Renesas chip and i dont know if the unit is dead or my vcds is faulty

I using vcds 21.90 china atmel hex cable
Try to connect the airbag module with hcan and lcan cable and in the settings of vcds
K1: OK
K2: OK
CAN: Not Ready
So i really dont know if i have brick the module or if my vcds is faulty

I dumped the Renesas chip using iprog+ and also the eeprom too

Please someone help me to test this module

[al70]

plug vcds onto car and hit test

[xameleon]

plug vcds onto car and hit test

i havent the car now,you mean to enter the airbag module or test in to usb settings?

[al70]

plug in, go to usb settings and test, can should be ok then,

[bolonc]

need help with 2 things

I try to make a dump for clearing crash data
Accidentally use wrong wiring on Renesas chip and i dont know if the unit is dead or my vcds is faulty

I using vcds 21.90 china atmel hex cable
Try to connect the airbag module with hcan and lcan cable and in the settings of vcds
K1: OK
K2: OK
CAN: Not Ready
So i really dont know if i have brick the module or if my vcds is faulty

I dumped the Renesas chip using iprog+ and also the eeprom too

Please someone help me to test this module

Try this connection...................

[superjet]

module is damge,your 12v is wrong

[xameleon]

module is damge,your 12v is wrong

what do you mean?the 12v is not in the red?
i test it,the cable is working,its 100% module damage any ideas how to repair it?

[superjet]

correct pinout is this

[xameleon]

need help with 2 things

I try to make a dump for clearing crash data
Accidentally use wrong wiring on Renesas chip and i dont know if the unit is dead or my vcds is faulty

I using vcds 21.90 china atmel hex cable
Try to connect the airbag module with hcan and lcan cable and in the settings of vcds
K1: OK
K2: OK
CAN: Not Ready
So i really dont know if i have brick the module or if my vcds is faulty

I dumped the Renesas chip using iprog+ and also the eeprom too

Please someone help me to test this module

Try this connection...................

IT WORKS!!!
but why on car doesnt recognise it?

also is there any solution for vcds 21.9? Its unsupported VIN

[bolonc]

Check dflash.........