ATTENTION !! Users which have not any posts were deleted !
  1. AutoHex II

  2. FemtoEVO

  3. AUTO CHIPS



Solved ✔ FZD Alarm retrofit please help
20-03-2020, 21:57 PM, (This post was last modified: 24-03-2020, 03:54 AM by Clusters.)
Post: #1
FZD Alarm retrofit please help
Can someone please help me I have a problem with siren or fzd not sure.
I install today 
FZD 61316826921
SIREN 9198581
CODING :HU-NBT,REM,FEM,FZD
ERROR : LIN SINE COMMUNICATION FAULT


Attached Files Thumbnail(s)
   
21-03-2020, 07:36 AM, (This post was last modified: 21-03-2020, 07:39 AM by user0086.)
Post: #2
RE: FZD Alarm retrofit please help
Are you sure the wiring is correct?
FZD is correct otherwise it would not give you that error code.
21-03-2020, 08:26 AM,
Post: #3
RE: FZD Alarm retrofit please help
I must to check again but i recheck everything 3 times. Today i will see and report. Thanks
21-03-2020, 09:51 AM,
Post: #4
RE: FZD Alarm retrofit please help
Signal is in pin 11 -16 pin connector wiring it‘s ok sad
21-03-2020, 14:22 PM,
Post: #5
RE: FZD Alarm retrofit please help
How can I check siren with ista d?
21-03-2020, 14:39 PM,
Post: #6
RE: FZD Alarm retrofit please help
If ther no LIN connection, than you can't chech with ISTA.
The power for Siren is OK? It is from rear power distributor...

Vojnó

Press Thanks and reputation under if this post helped you. 
[-] The following 1 user says Thank You to Vojno for this post:
  • Siki78
21-03-2020, 15:41 PM,
Post: #7
RE: FZD Alarm retrofit please help
Hello,
I have done the retrofit a view weeks ago.
My mistake was a bad crimp contact.
Please check also the Ground wire.

I changed the VO via ESYS and left the flashing / coding to ISTA-D.
The FZD had old software.
[-] The following 1 user says Thank You to Stumpf17 for this post:
  • Siki78
21-03-2020, 16:04 PM,
Post: #8
RE: FZD Alarm retrofit please help
I will check again ground! Yes I put power on F102 with 5A rear fuse box.
Can I take a battery 9V just to try directly if siren working?
21-03-2020, 16:47 PM,
Post: #9
RE: FZD Alarm retrofit please help
No,
the siren must be activated via LIN bus.
Can you check the LIN bus signal with an oscilloscope?

(21-03-2020, 16:04 PM)Siki78 Wrote:  I will check again ground! Yes I put power on F102 with 5A rear fuse box.
Can I take a battery 9V just to try directly if siren working?
21-03-2020, 16:53 PM, (This post was last modified: 21-03-2020, 16:56 PM by Siki78.)
Post: #10
RE: FZD Alarm retrofit please help
One more error. Ground is ok


Attached Files Thumbnail(s)
   


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Gxx shift paddle retrofit - coding acolt 2 100 1 hour ago
Last Post: sguzzel
  ATM retrofit, I can not update bmw services ruben_17non 1 100 03-04-2020, 21:44 PM
Last Post: BugFix
  Bmw F11 11/2011 Nbt Retrofit Rieger 13 341 03-04-2020, 11:36 AM
Last Post: Rieger
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 880 399,891 02-04-2020, 13:56 PM
Last Post: atomantmk
XZBMW Solved ✔ Mini CHAMP2 retrofit, cannot connect via enet to e-sys jamesworts 6 142 02-04-2020, 12:51 PM
Last Post: jamesworts
XSMini Mini F Series Comfort Access retrofit maninblack 5 552 01-04-2020, 20:24 PM
Last Post: maninblack
  BMW G30 Retrofit ICAM ultimate 9 3,108 01-04-2020, 15:49 PM
Last Post: Shatter
  G05 retrofit SA 5DF Patrick11021979 2 264 31-03-2020, 20:40 PM
Last Post: Volum
XZBMW G30 6WB cluster retrofit problem Shatter 12 777 31-03-2020, 18:27 PM
Last Post: Levanime
  G31 SpeedLimitInfo retrofit, FSC? Freddy1 54 15,486 30-03-2020, 18:00 PM
Last Post: infer

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content