ATTENTION !! Users which have not any posts were deleted !
  1. AutoHex II

  2. FemtoEVO

  3. AUTO CHIPS



Solved ✔ FZD Alarm retrofit please help
21-03-2020, 18:20 PM,
Post: #11
RE: FZD Alarm retrofit please help
@Stumpf17
I don‘t have a sunroof but schuld I have connection on pin 1 (ground) and 2( power via F62 30A)on16 pin connector or not?
22-03-2020, 13:54 PM,
Post: #12
RE: FZD Alarm retrofit please help
(21-03-2020, 16:04 PM)Siki78 Wrote:  I will check again ground! Yes I put power on F102 with 5A rear fuse box.
Can I take a battery 9V just to try directly if siren working?

F102 !!! This is the wrong fuse. According schematic Siren use F103.
22-03-2020, 14:36 PM, (This post was last modified: 22-03-2020, 14:37 PM by Stumpf17.)
Post: #13
RE: FZD Alarm retrofit please help
Thanks for the hint, overlooked it. gavel 

(22-03-2020, 13:54 PM)Coding34 Wrote:  
(21-03-2020, 16:04 PM)Siki78 Wrote:  I will check again ground! Yes I put power on F102 with 5A rear fuse box.
Can I take a battery 9V just to try directly if siren working?

F102 !!! This is the wrong fuse. According schematic Siren use F103.


Attached Files
sirene.txt
File Type: .txt
Downloaded: 9 times
Size: 125 bytes

22-03-2020, 18:47 PM,
Post: #14
RE: FZD Alarm retrofit please help
Then I need to change for 103 and report back. Thanks for advice
23-03-2020, 13:46 PM,
Post: #15
RE: FZD Alarm retrofit please help
I change yesterday pin to 103 but I didn‘t code fzd ecu and clean error with ista. No change siren doesn‘t response. Just red light flashing and if I try to activate alarm I don‘t see any change at all light flashing or something else
23-03-2020, 14:19 PM,
Post: #16
RE: FZD Alarm retrofit please help
It doesn't matter which fuse it comes from. You have check power directly on the sirene?

under If my post helped you hit the thanks and reputation button. Thank you. yes
[-] The following 1 user says Thank You to user_530d for this post:
  • Siki78
23-03-2020, 21:18 PM, (This post was last modified: 23-03-2020, 21:21 PM by Siki78.)
Post: #17
RE: FZD Alarm retrofit please help
I did the check right now. On fuse box i have a light(power) but on siren when I pull connector out I don‘t have it


Attached Files Thumbnail(s)
   
23-03-2020, 22:36 PM,
Post: #18
RE: FZD Alarm retrofit please help
OK.
Now you have to check what is missing, plus or ground.
Or check both lines from beginning to the end.

under If my post helped you hit the thanks and reputation button. Thank you. yes
Reputation: +1 - Siki78 [+1]
[-] The following 1 user says Thank You to user_530d for this post:
  • Siki78
24-03-2020, 01:07 AM,
Post: #19
RE: FZD Alarm retrofit please help
Thanks my friends it was power wire... Wooorking smile


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW G30 6WB cluster retrofit problem Shatter 6 508 1 hour ago
Last Post: DayvG
XZBMW Retrofit ACC Adaptive Cruise Control with Camera for F22 dezihh 8 290 Yesterday, 18:49 PM
Last Post: dezihh
XZBMW BMW X3 F25 manual headlight adjustment retrofit mike1 5 164 Yesterday, 07:12 AM
Last Post: mike1
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 878 398,900 27-03-2020, 22:46 PM
Last Post: BMWUPDATE
XZBMW Bmw 640D F06 5AT retrofit Pedrom92 36 495 27-03-2020, 16:21 PM
Last Post: user_530d
  Retrofit wireless charging G30 Patrick11021979 5 526 26-03-2020, 07:47 AM
Last Post: Fractals
XZBMW G11 shift paddles retrofit acolt 3 216 25-03-2020, 17:10 PM
Last Post: acolt
XZBMW Solved ✔ G30 5 DL retrofit Deimis 6 197 25-03-2020, 06:22 AM
Last Post: Deimis
XZBMW EVO Retrofit F06 F12 F13 LCI NBT screen "No Signal" Dekota28 8 354 23-03-2020, 18:40 PM
Last Post: DayvG
  G05 retrofit SA 5DF Patrick11021979 0 115 22-03-2020, 18:22 PM
Last Post: Patrick11021979

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content