ATTENTION !! Users which have not any posts were deleted !
  1. New Emulator

  2. Immo Bypass

  3. Julie Emulator

  4. AUTO CHIPS



Skoda Octavia 3 2014 retrofit Virtual cocpit
22-03-2020, 12:07 PM,
Post: #1
ZSkoda  Skoda Octavia 3 2014 retrofit Virtual cocpit
Hello All

Has anybody any experience with retrofit Skoda octavia 3 2014 with dashoard Virtual cocpit 2018 ?
Is possible?
Did anybody try to do this job anytime?

thank you
Quote this message in a reply
22-03-2020, 17:39 PM,
Post: #2
RE: Skoda Octavia 3 2014 retrofit Virtual cocpit
yes, what is a problem ?
Quote this message in a reply
[-] The following 1 user says Thank You to spacewalker for this post:
  • maros4341
22-03-2020, 18:52 PM,
Post: #3
RE: Skoda Octavia 3 2014 retrofit Virtual cocpit
(22-03-2020, 17:39 PM)spacewalker Wrote:  yes, what is a problem ?

There is No problem.
I just want to know if is it possible...
Quote this message in a reply
30-03-2020, 20:02 PM,
Post: #4
RE: Skoda Octavia 3 2014 retrofit Virtual cocpit
Hi dear, if you refer to mileage correction virtual cockpit cannot be done by all tools you can see by obd for now but you can use km freezer. O there's a way more complicated by disassembling the dash and change chipset etc...
Quote this message in a reply
30-03-2020, 20:26 PM,
Post: #5
RE: Skoda Octavia 3 2014 retrofit Virtual cocpit
I dont want change mileage, just client want upgrade his car from standard instrument to Virtual cocpit. It seems I will install new unit so it will not be any problem to set correct value of mileage
Quote this message in a reply
30-03-2020, 20:33 PM,
Post: #6
RE: Skoda Octavia 3 2014 retrofit Virtual cocpit
If it's MY2014 then watch out for gateway - if it's 5Q0 you won't have the AID settings menu on MIB. You have to replace gateway to 3Q0 but do that in 2 separate steps:
1.) while old instrument cluster mounted, replace gateway, do the CP online, od the FFS. The result has to be 100% working everything, if it's not, then don't continue - first you have solve all of the errors.
2.) if the gateway was replaced correctly, start a new job in ODIS and replace the instrument cluster with AID. Don't forget to save the coding of old cluster as ODIS can't transfer the complete coding automatically. After you finish CP removal and FFS, fix the coding and adaptations using VCDS or VCP.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  re fordv ranger 2014 south africa model dash adjust gskuvarega 1 58 30-03-2020, 22:34 PM
Last Post: Clusters
ZSkoda Octavia 5E0 Virtual Cockpit flash failed chobott 1 116 30-03-2020, 20:35 PM
Last Post: plier
0Dash Original NYO4 2014 FULL (ACTIVATION) volavka 808 296,177 27-03-2020, 17:51 PM
Last Post: soussikey
ORenult I NEED DUMP ORG FOR DASH RENAULT TRAFIC 2 BUS 2014 rayhane13 0 130 19-03-2020, 14:22 PM
Last Post: rayhane13
ZSkoda Flash 1Z0920843D octavia II dash smajchel1 4 451 09-03-2020, 11:02 AM
Last Post: PhilipArt
  minidot to maxidot skoda octavia 2 (1z) prefacelift djovidius 0 91 09-03-2020, 10:47 AM
Last Post: djovidius
  Skoda fabia III (NJ) long coding dashboard ??? mareckibel 0 118 08-03-2020, 08:30 AM
Last Post: mareckibel
  Ford Transit 2014 gobe 2 388 20-02-2020, 00:38 AM
Last Post: jomberykaso
XZBMW Mileage correction bmw f25 x5 2014 ider38 8 1,593 19-02-2020, 22:41 PM
Last Post: Carspro
  Peugeot 208 1.6HDI - 2014 correction mileage in bsi bobox83 2 275 18-02-2020, 08:18 AM
Last Post: bobox83

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content