[alexturbo]

Hello,

how to replace used PCM on Ford Mondeo MK3? Vxdiag with IDS or Forscan?
instructions please.


thanks
best regards

[rwgodoy]

Hello,

First off all, do the PMI Procedure.
Second, PATS. (make sure you have 2 keys to program)
If needed, you can Flash the new ECU.

except the Flash procedure, you can use ForScan
to Flash, you can use IDS (VxDiag works fine)

[alexturbo]

Hello,

First off all, do the PMI Procedure.
Second, PATS. (make sure you have 2 keys to program)
If needed, you can Flash the new ECU.

except the Flash procedure, you can use ForScan
to Flash, you can use IDS (VxDiag works fine)

Hi,

PMI procedure not performed due to FEPS error. I did not measure 18V on pin 13 during this procedure.
What exactly does this PMI do? Can't I do PATS directly?