Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ford Mondeo MK3 used PCM renew
03-06-2022, 22:22 PM,
Post: #1
|
|||
|
|||
Ford Mondeo MK3 used PCM renew
Hello,
how to replace used PCM on Ford Mondeo MK3? Vxdiag with IDS or Forscan? instructions please. thanks best regards |
|||
04-06-2022, 02:33 AM,
Post: #2
|
|||
|
|||
RE: Ford Mondeo MK3 used PCM renew
Hello,
First off all, do the PMI Procedure. Second, PATS. (make sure you have 2 keys to program) If needed, you can Flash the new ECU. except the Flash procedure, you can use ForScan to Flash, you can use IDS (VxDiag works fine) |
|||
04-06-2022, 09:09 AM,
Post: #3
|
|||
|
|||
RE: Ford Mondeo MK3 used PCM renew
(04-06-2022, 02:33 AM)rwgodoy Wrote: Hello,Hi, PMI procedure not performed due to FEPS error. I did not measure 18V on pin 13 during this procedure. What exactly does this PMI do? Can't I do PATS directly? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content