[ir655]

Does anyone know or have successfully coded cornering fog lights on their F10/F11 LCI with LED fog lights? I have bixenon, no AHL.

I tried the following based on feedback from another user at another forum:

"So after long couple of hours trying to get correct coding here is the working version for F11 LCI version with bixenon without AHL:

FRM > 3080 > Lamp_map_para_satz_01 > BV_F025_WERT02_Corneringlight-UBER-NSW

FRM > 3080 > Lamp_map_para_satz_02 > BV_F025_WERT02_Corneringlight-UBER-NSW

FRM > 3060 > U_EFF_CL > wert_07__13,0V = 82 ( I ticked 100% )
FRM > NSW_AUS_BEI_FL > aktive

FRM > C_CLC_ENA > F025_enable"

I tried these settings without success, I used Bimmercode as the person that posted this also used Bimmercode and I didnt have my laptop with me at the time to try with E-sys, but that shouldn't matter right?

[Twointje]

Does anyone know or have successfully coded cornering fog lights on their F10/F11 LCI with LED fog lights? I have bixenon, no AHL.

I tried the following based on feedback from another user at another forum:

"So after long couple of hours trying to get correct coding here is the working version for F11 LCI version with bixenon without AHL:

FRM > 3080 > Lamp_map_para_satz_01 > BV_F025_WERT02_Corneringlight-UBER-NSW

FRM > 3080 > Lamp_map_para_satz_02 > BV_F025_WERT02_Corneringlight-UBER-NSW

FRM > 3060 > U_EFF_CL > wert_07__13,0V = 82 ( I ticked 100% )
FRM > NSW_AUS_BEI_FL > aktive

FRM > C_CLC_ENA > F025_enable"

I tried these settings without success, I used Bimmercode as the person that posted this also used Bimmercode and I didnt have my laptop with me at the time to try with E-sys, but that shouldn't matter right?

Hello..
I have a F10 LCI also with BIxenon and LEd foghlights and these are the FDL codings that i did and the foghlights are working as corneringlights but i did these FDL codings with EsysX.

Fog lights as cornering lights. (For LCI models )

3080→LAMP_MAP_PARA_SATZ_01→BV_F025_wert_02_Cornerlight_ueber_NSW:werte=07,0E,12,64
3080→LAMP_MAP_PARA_SATZ_02→BV_F025_wert_02_Cornerlight_ueber_NSW:werte=08,01,12,64
3060→U_EFF_CL→same value as NSW% (set to : 100% werte = 32 )
3073→C_AFS_ENA : set to : F001_enable : werte = 01
3073→C_CLC_ENA : set to : F001_enable : werte = 01
3073→C_HBA_ADAPT_SHUT_ENA : set to : F001_enable : werte = 01

Best regards

[ir655]

I tried your settings in esys 3.30.1 and launcher 2.8.155 still no go.

I turned the low beams on and turned the wheel, also tried with blinker, not working.

In 3073 settings I had option to choose F001, F010 and F025 enable. I tried first with F001 then F010 and finally F025, still no cornering lights.

I guess my car doesnt want that feature then

[Twointje]

I tried your settings in esys 3.30.1 and launcher 2.8.155 still no go.

I turned the low beams on and turned the wheel, also tried with blinker, not working.

In 3073 settings I had option to choose F001, F010 and F025 enable. I tried first with F001 then F010 and finally F025, still no cornering lights.

I guess my car doesnt want that feature then

Did you code all the correct settings?? i coded this funtion on several F10-F11 LCI from 2016 without any problems.

---

Maybe this has someting to do with your launcher.
You have to set your lights on automatic.

[ir655]

Since its still daylight here I was not able to test this with the light switch in Auto. I will give it a try at night. I double checked settings at least 4 times so I didn't miss anything. I even Vo coded the FRM to stock setting to start with a clean stock setting. I havent had any issues coding other modules with this launcher so it should be fine.

I will report back.

[ir655]

Update: had a chance to test it while it was dark outside and it works like a charm! Dont know if it has to be dark outside and/or switch in Auto for it to work, but it works now so thanks.

[Twointje]

Update: had a chance to test it while it was dark outside and it works like a charm! Dont know if it has to be dark outside and/or switch in Auto for it to work, but it works now so thanks.

The light switch has to be on Auto ,otherwise it wont work.
Dont forget my reputation