Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Needed replacement EDC16cp34
20-06-2022, 20:48 PM,
Post: #1
Needed replacement EDC16cp34
HI

I have VW touareg 3.0 from 2006 with a damaged ECU, no voltage for the crankshaft sensor.EDC16cp34  7L0 907 401 B /  0 281 012 773
I have a question, if having an ecu with the same numbers, it is enough to copy the eeprom, or do you need to make a clone, i.e. rewrite the full BDM.
 If I have an ecu with other numbers, e.g. 0281013322, 0281013406 or 0281013692, I have to make a complete clone rewriting full bdm.
The second question, having a clean ecu ready to be programmed, is enough just to add it, e.g. with VCDS.

Thanks .
Regards
Quote this message in a reply
21-06-2022, 04:20 AM,
Post: #2
RE: Needed replacement EDC16cp34
you should read immo login from old (in your case, it's still working) one and new one.
Then you can adapt an edc16 ecu with vcds, best and safest way i think.

how it's done you can find in rosstech wiki (immo3, changing ecu).

good luck.
Quote this message in a reply
[+] 2 users say Thank You to -Harry- for this post
22-06-2022, 10:58 AM,
Post: #3
RE: Needed replacement EDC16cp34
(20-06-2022, 20:48 PM)dob12 Wrote:  HI

I have VW touareg 3.0 from 2006 with a damaged ECU, no voltage for the crankshaft sensor.EDC16cp34  7L0 907 401 B /  0 281 012 773
I have a question, if having an ecu with the same numbers, it is enough to copy the eeprom, or do you need to make a clone, i.e. rewrite the full BDM.
 If I have an ecu with other numbers, e.g. 0281013322, 0281013406 or 0281013692, I have to make a complete clone rewriting full bdm.
The second question, having a clean ecu ready to be programmed, is enough just to add it, e.g. with VCDS.

Thanks .
Regards

You write full BDM or only eaprom easy ...
Reputation: +1 - dob12 [+1]
Quote this message in a reply
[+] 1 user says Thank You to Gabriel87 for this post
22-06-2022, 19:59 PM,
Post: #4
RE: Needed replacement EDC16cp34
I made a full BDM copy,
now I just need to find the correct ECU
Quote this message in a reply
22-06-2022, 21:18 PM,
Post: #5
RE: Needed replacement EDC16cp34
(22-06-2022, 19:59 PM)dob12 Wrote:  I made a full BDM copy,
now I just need to find the correct ECU

 0281012773
 0281013332

 0281013604

 0281013686

 0281013692

 0281014115
Quote this message in a reply
[+] 1 user says Thank You to Gabriel87 for this post
23-06-2022, 22:03 PM,
Post: #6
RE: Needed replacement EDC16cp34
thanks still looking
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
PPeugeot Immo off and virgin needed for Valeo J34P ecu MARTINS AUTOMECH 1 43 26-03-2024, 06:53 AM
Last Post: sivyx
PCitroen flash bsi C4 JC needed baatouz 0 40 19-03-2024, 12:02 PM
Last Post: baatouz
  chiploader 1.97.7 needed tihiuvek 3 978 16-03-2024, 09:23 AM
Last Post: MPTeam
  Bmw edc16c1 immo help needed tihiuvek 1 91 15-03-2024, 06:26 AM
Last Post: raffy haddad
  polo tsi med 17.5.25 immo off needed andys197 13 301 14-03-2024, 11:58 AM
Last Post: andys197
  NV400 2018 BCM-N3 PIN code needed! parvanov3 0 44 13-03-2024, 11:04 AM
Last Post: parvanov3
ORenult Renault Espace UCH cleared ISK needed zszoli 2 139 06-03-2024, 10:08 AM
Last Post: raffy haddad
PCitroen C4 1.6HDI 0281012980 Full BDM needed! parvanov3 1 60 04-03-2024, 18:27 PM
Last Post: al70
PPeugeot Vergin needed ecu valeo psa v 34.1 didi70 1 93 23-02-2024, 09:08 AM
Last Post: snake13
  citroen c5 bsi dump needed K01 966405878001 ottway 0 40 16-02-2024, 13:08 PM
Last Post: ottway

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content