Possibly Related Threads…

***shawnsheridan*** · 02-09-2019, 17:02 PM,

(02-09-2019, 16:50 PM)blax123 Wrote: i mean for cars with factory fitted evo's/entrynav's
thought i can readout a file like cic/nbt and generate a fsc file for map update with it.

Again, You cannot do anything with ENTRYNAV Head Unit.

***blax123*** · 04-09-2019, 09:43 AM,

how to activate a NBT Unit with generated FSC's from HU Tool 2.6?
Like CIC?

First patch it with the .BIN which is generated during FSC Generting?
Stick with Patch to USB in Center Console
wait 30 sec.
remove stick
manually restart with tool32
after approx. 1 min. automatic restart

and then import SIG/DER/FSC with E-Sys?

***milkyway*** · 04-09-2019, 10:04 AM,

Hello!

First at all, code the NBT with the correct VIN and insert the long vin via E-Sys.

When you load the FSC set via USB on the NBT everything is done. No need to load any sig.der. The next step is to start navigation and type in the FSC (also generated). Done.

CU Oliver

***blax123*** · 04-09-2019, 10:58 AM,

(04-09-2019, 10:04 AM)milkyway Wrote: Hello!

First at all, code the NBT with the correct VIN and insert the long vin via E-Sys.

When you load the FSC set via USB on the NBT everything is done. No need to load any sig.der. The next step is to start navigation and type in the FSC (also generated). Done.

CU Oliver

I know normally the USB Activations got around 2-3MB on the .BIN File.

The .BIN generated with HU Tool 2.6 only got 40KB. So i thought i have to patch it with the 40KB file and manually import the SIG/DER/FSC's? Or will the 40KB File do all the Job?

***danyro*** · 04-09-2019, 11:26 AM,

on my car, i made it work by loading manually with esys all certificates/fscs afert i've rebooted the unit.
hutool 2.6 pre used. no automatic process behind.

***blax123*** · 04-09-2019, 11:32 AM,

(04-09-2019, 11:26 AM)danyro Wrote: on my car, i made it work by loading manually with esys all certificates/fscs afert i've rebooted the unit.
hutool 2.6 pre used. no automatic process behind.

but in the first you patched with the 40KB .BIN File?
then manually loaded everything with e-sys?

***danyro*** · 04-09-2019, 12:14 PM,

Exactly. That was the process

24-06-2022, 15:46 PM,

(02-09-2019, 15:45 PM)HU_man Wrote:
(02-09-2019, 12:05 PM)blax123 Wrote: how to use it for map update EVO/Route?
Make new folder name FSC in usb contained map data, copy map fsc file to that folder. Plug to car and auto update will start.

Dear !
Can you help me install hutool

***dncomputech*** · 24-06-2022, 16:34 PM,

(24-06-2022, 15:46 PM)manhthanphong Wrote:
(02-09-2019, 15:45 PM)HU_man Wrote:
(02-09-2019, 12:05 PM)blax123 Wrote: how to use it for map update EVO/Route?
Make new folder name FSC in usb contained map data, copy map fsc file to that folder. Plug to car and auto update will start.

Dear !
Can you help me install hutool

Hutool 2.6 Just click and use software with no installation required

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	NBT Evo CAFD missing after coding error	Mugga	13	607	24-04-2024, 22:47 PM Last Post: Mugga
	Source for DAMOS/A2L file	skouk	0	71	24-04-2024, 08:55 AM Last Post: skouk
	[MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed	hashtagmaster	61	18,428	21-04-2024, 22:17 PM Last Post: grizzle
	SSD file request as I'm hopeless.	GoNz0-	4	209	20-04-2024, 07:25 AM Last Post: GoNz0-
	F10 FRM III eeprom needed for repair	claw	0	71	19-04-2024, 16:16 PM Last Post: claw
	G01 2019 X3 - ATM Replacement/Coding Help Needed	jchisholm17	10	467	18-04-2024, 21:44 PM Last Post: jchisholm17
	Eeprom dump needed for EHC E60	Matthew53	0	65	15-04-2024, 22:27 PM Last Post: Matthew53
	ISTA File Missing?	Homersbud	5	307	13-04-2024, 23:53 PM Last Post: rocdeng
	MINI R60 .SSD-File COAPI-1000	bmw335coding	0	54	11-04-2024, 14:56 PM Last Post: bmw335coding
	Need NBT EVO ID6 eMMC File	Emmy	2	292	10-04-2024, 21:50 PM Last Post: Mwahab

Contact Us