[hulahans]

Flashed whole car 11/20 G20 now to 22-07-521 with Esys TM ,psdzdata 4.36.12
One ECU is DKOMBI4, its not possible to flash, with error 
"esys programming token is either empty or unsigned"
I used Pro launcher 5.0.6 with Esys 3.40.2

Could this be a problem of the Esys Version, Have to test older Esys version , but not sure where the problem is.

[Bimmer540]

You not need launcher to flash

[hulahans]

I know, but no difference. Thats the reason why i asked if this could be a esys version problem, not a launcher problem

[Bmw325x]

Try older version

[hulahans]

Did this too, down to 36.2, the normal version i flash my car with.
But same problem, now kombi is flashmode from Esys prepare but not possible to abort this.
So have no idea where the problem is. Installing ista now to get the Kombi out of flashmode.
Its not reachable with Gini for example at the moment

[hulahans]

Don t get kombi out of flashmode, its dark and after downgradeflash back to 4.35.40 Hu is in flash mode too, and aborted the flash.Tried Ista , but don t get it work again.

How can i get this two ECU out of flashmode , with Gini and Tool32 in Kombi module there is no such command. Only reset


For Kombi i found this from Shawn, will try it

go to external applications
double click the transmitter
click the connect button
double click 31 01 0f 0c 00;setenergymodedefault.

[hulahans]

Can not get kombi out of flashmode, ist says its not coded , but i can not reach it.
Hu is bluescreen in flash mode , can not get it back to normal mode.Its shown in Esys but noch reachabel.

Any Ideas how i can solve this

[TheNine90]

Whats missing in the svt tree for HU?

[hulahans]

HU is working, but it flashed in UDS mode nearly 8hours.
Kombi we can not get working anymore , not possible to bring in flashmode.
Seems that it try to start and then got a reset and try tostart again in endless loop, you here it because of beeping

[Abou Jambo]

I also tried flash DKOMBI4 with esys 3.40.1 for G07 didn't flash with Token missing error.


3.62.2 KOMBI flashed successfully, however stuck in a problem used KOMBI vin changed in EEPROM all worked just the picture in center KOMBI remain G05 (donor car) mileage is correct and no red dot