Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Original ICOM Next A fault!!!
24-06-2022, 18:18 PM,
Post: #1
|
|||
|
|||
Original ICOM Next A fault!!!
I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it?
Thank you for your answers!!! |
|||
24-06-2022, 22:31 PM,
Post: #2
|
|||
|
|||
RE: Original ICOM Next A fault!!!
(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it? whats the current firmware? Did you try to update it? |
|||
24-06-2022, 23:23 PM,
Post: #3
|
|||
|
|||
RE: Original ICOM Next A fault!!!
(24-06-2022, 22:31 PM)elthox Wrote:Originally is 3.15.08 firmware, I want to upgrade 4.22.11, upgrade after the problem!(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it? |
|||
25-06-2022, 00:11 AM,
(This post was last modified: 25-06-2022, 00:11 AM by Diagmaister.)
Post: #4
|
|||
|
|||
RE: Original ICOM Next A fault!!!
(24-06-2022, 23:23 PM)BMWF750GS Wrote:Upgrade firmware maybe solves the problem if not the hardware issue(24-06-2022, 22:31 PM)elthox Wrote:Originally is 3.15.08 firmware, I want to upgrade 4.22.11, upgrade after the problem!(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it? (24-06-2022, 23:23 PM)BMWF750GS Wrote:Upgrade firmware maybe solves the problem if not the hardware issue(24-06-2022, 22:31 PM)elthox Wrote:Originally is 3.15.08 firmware, I want to upgrade 4.22.11, upgrade after the problem!(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it? |
|||
25-06-2022, 05:36 AM,
Post: #5
|
|||
|
|||
RE: Original ICOM Next A fault!!!
(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it? Copy firmware(any version) to a FAT32 USB then insert it to icom next. Power off ICOM press and hold reset button. Now power on icom. when you see icom system led light green release reset button. In 5 seconds press reset button 3 times. you will see all leds flashing in red. Wait it until all leds flash green. Done |
|||
25-06-2022, 10:28 AM,
Post: #6
|
|||
|
|||
RE: Original ICOM Next A fault!!!
(25-06-2022, 05:36 AM) BMW888 Wrote:So is the recovery button the one next to the network port, or the white one?(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it? |
|||
25-06-2022, 10:43 AM,
Post: #7
|
|||
|
|||
RE: Original ICOM Next A fault!!!
(25-06-2022, 10:28 AM)BMWF750GS Wrote:(25-06-2022, 05:36 AM) BMW888 Wrote:So is the recovery button the one next to the network port, or the white one?(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it? The white one. |
|||
25-06-2022, 13:13 PM,
Post: #8
|
|||
|
|||
RE: Original ICOM Next A fault!!!
Did you flash new firmware?
|
|||
25-06-2022, 13:35 PM,
Post: #9
|
|||
|
|||
RE: Original ICOM Next A fault!!!
|
|||
25-06-2022, 14:00 PM,
Post: #10
|
|||
|
|||
RE: Original ICOM Next A fault!!!
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
[MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS | hashtagmaster | 105 | 35,823 |
17-04-2024, 18:36 PM Last Post: hashtagmaster |
|
DDE509 Internal fault 7 code 4703 | GoNz0- | 0 | 57 |
14-04-2024, 14:42 PM Last Post: GoNz0- |
|
ICOM Firmware (NEXT & A2) always current! | Vojno | 206 | 42,931 |
12-04-2024, 23:36 PM Last Post: bennymx |
|
Poor wifi signal from new ICOM's | bmchicago | 3 | 305 |
12-04-2024, 18:55 PM Last Post: Node |
|
Solved ✔ ICOM NEXT Error | bmwcare | 4 | 2,476 |
01-04-2024, 11:34 AM Last Post: ivanp |
|
CCC flash WINKFP ICOM | BimmerSLO | 9 | 360 |
29-03-2024, 19:17 PM Last Post: Hoborg |
|
M3 F80 LCI Airbag fault | Stefan1251 | 8 | 372 |
25-03-2024, 00:18 AM Last Post: armenh7 |
|
For anyone having problem with ICOM NEXT FW update via ISTA+. | ImmBoo | 16 | 4,132 |
24-03-2024, 11:29 AM Last Post: Twointje |
|
TESTO tool with ICOM | Rolzs | 5 | 425 |
17-03-2024, 20:23 PM Last Post: Vojno |
|
bmw fault code46d1 | wassim | 4 | 226 |
09-03-2024, 07:58 AM Last Post: wassim |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content