[MPTeam]

Hi. The second day I suffer with software update on NBT. Bootloader file flashed without problems but next swfl with an error. After that, I tried  ISTA+, e-sys (3.30, 3.33, 3.34) of different versions, with protocols http and uds, ISTA+ service function "cancellation of programming on the head unit", NBT specialists from other cities were connected to help me, but all without result. I ask for help.


Log:

Read SVT before TAL execution started.
TAL execution started.

VCM Update: VCM-Update is deactivated. VCM will not be updated.
<ExecutionID=2022/06/25-03:02:24.841>
<[] prepareTALExecution started [PROGRESS]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForFlash started [PROGRESS]>
<MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]>
<MCDDiagService<id=38000, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_CPPC, description=ECU signaled that any ProgrammingPreCondition not fullfilled, but no further details provided from ECU!, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]>
<[] prepareVehicleForFlash finished [PROGRESS]>
<[HU_NBT2 - 63] prepareECUforFlash started [PROGRESS]>
<[HU_NBT2 - 63] prepareECUforFlash finished [PROGRESS]>
<[HU_NBT2 - 63] authenticateECUforFlash started [PROGRESS]>
<[HU_NBT2 - 63] authenticateECUforFlash finished [PROGRESS]>
<[HU_NBT2 - 63 - swfl_0000271a-007_007_008] Transaction type: swDeploy;  Message: TA started [TRANSACTION]>
<[HU_NBT2 - 63 - swfl_0000271a-007_007_008] Transaction type: swDeploy;  Message: 0% progress on ECUId:HU_NBT2_0x63 [0% of swfl_0000271a-007_007_008] [TRANSACTION]>
...
<[HU_NBT2 - 63 - swfl_0000271a-007_007_008] Transaction type: swDeploy;  Message: 0% progress on ECUId:HU_NBT2_0x63 [0% of swfl_0000271a-007_007_008] [TRANSACTION]>
<MCDDiagService<id=333200, job=com.bmw.psdz.jobs.http.MCD3_PerformECUFlash_Http, service=RC_CHECK_MEMORY_HTTP - RoutineControl CheckMemoryHttp, description=error: positive response with negative content, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]>
<[HU_NBT2 - 63 - swfl_0000271a-007_007_008] Transaction type: swDeploy;  Message: 25% progress on ECUId:HU_NBT2_0x63 [100% of swfl_0000271a-007_007_008] [TRANSACTION]>
<[] job failed with negative response error: 
 code: result of the routine control service is not correct
 description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR
 [THROWABLE]>
<[HU_NBT2 - 63 - swfl_0000271a-007_007_008] Transaction type: swDeploy;  Message: TA finished [TRANSACTION]>
<[HU_NBT2 - 63] There was an error during TAL execution, please check the log files. [WARN]>
<[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error: 
 code: result of the routine control service is not correct
 description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR
>
<[HU_NBT2 - 63] finalizeECUFlash started [PROGRESS]>
<[HU_NBT2 - 63] finalizeECUFlash finished [PROGRESS]>
<[] There was an error, please check the log files. [WARN]>
<[] - [Exception - HU_NBT2 - 63] job failed with negative response error: 
 code: result of the routine control service is not correct
 description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR
>
<[] finalizeVehicleFlash started [PROGRESS]>
<[] finalizeVehicleFlash finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithError".
TAL execution finished. Duration: "6min 40s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.

[Rob@BU]

Was the disc drive functioning prior to flash?

Failing at 271A at 100% , is a good sign it's not , swap the drive with another working disc drive than flash it again.

[MPTeam]

Please tell me from which HU, other than nbt evo, the cd-drive can be suitable?

[laquangksxd]

error due to cd, hdd or mainboard connection between cd and hdd

[dasi]

error due to cd, hdd or mainboard connection between cd and hdd

You can disable drive in adjblock and flash it without it

[MPTeam]

Good afternoon. Please tell me how to check the status of the hdd (job tool32?) and how can I turn off the optical drive? Thanks.

[MPTeam]

I installed another optical drive, but there was a disk in it, I'm trying to remove it, but it doesn't work. are there any other ways? When applying voltage to the GU, should the disk spin? I have it without movements.

Tool32->nbtevo.prg-> steuern -> as argument type
"STEUERN_EJECT;1;1" and hit F5
JOB_STATUS = ERROR_ARGUMENT
JOB_MESSAGE = Argument ARGUMENT_SPALTE='STEUERN_EJECT' not valid.

or "STEUERN_EMERGENCY_EJECT;1;1" and hit F5
JOB_STATUS = ERROR_ARGUMENT
JOB_MESSAGE = Argument ARGUMENT_SPALTE='STEUERN_EMERGENCY_EJECT' not valid.

JOB STEUERN_ROUTINE
ARG;STEUERN_EJECT;STR;04

apiJob("NBTEVO","steuern_routine","ARG;STEUERN_EJECT;STR;04","")
EDIABAS Error 219 : IFH-0069: GATEWAY ERROR

[dasi]

STEUERN_EMERGENCY_EJECT and 0x0004

try

[Rob@BU]

Remove the disc manually with your hands.

[MPTeam]

I removed the disk mechanically.
HU flash error.
Please tell me - in the tool32 how to see that everything is fine with hdd and optical drive?
Can I try to replace this adapter?