Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
320d E46 M47 VP44 DDE 3.0 bricked after failed WinKFP update
28-06-2022, 07:48 AM,
Post: #11
|
|||
|
|||
RE: 320d E46 M47 VP44 DDE 3.0 bricked after failed WinKFP update
Use the DIS program. It will repair your ECU in a few minutes, even on the cheapest cable. I had a similar case with DDE4.
|
|||
Reputation: +1 - al70 [+1] | |||
29-06-2022, 06:28 AM,
Post: #12
|
|||
|
|||
RE: 320d E46 M47 VP44 DDE 3.0 bricked after failed WinKFP update
For me these units always bricks with WinKFP, also with ICOM. To recover I use ISTA-P with ICOM or DIS with old RS232 cable.
|
|||
29-06-2022, 12:27 PM,
Post: #13
|
|||
|
|||
RE: 320d E46 M47 VP44 DDE 3.0 bricked after failed WinKFP update
İ had same issues afew days ago. Dde 3 i solve problem with dis only 2 minutes finished.
|
|||
29-06-2022, 16:14 PM,
Post: #14
|
|||
|
|||
RE: 320d E46 M47 VP44 DDE 3.0 bricked after failed WinKFP update
you can use the cheapest k-dcan cable, just set the port delay to 16msec and it will succeed
|
|||
29-06-2022, 22:09 PM,
Post: #15
|
|||
|
|||
RE: 320d E46 M47 VP44 DDE 3.0 bricked after failed WinKFP update
cheapest galetto 1260 will recover it (if you have flash, yours seems to be 7794715)
|
|||
30-06-2022, 15:01 PM,
Post: #16
|
|||
|
|||
RE: 320d E46 M47 VP44 DDE 3.0 bricked after failed WinKFP update
Or do it on bench with ADS IF
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content