Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW G30 Surround View retrofit
08-09-2022, 21:51 PM,
Post: #11
|
|||
|
|||
RE: BMW G30 Surround View retrofit
(31-07-2022, 11:16 AM)DEJMIEN Wrote:(31-07-2022, 07:02 AM)sguzzel Wrote: Flash should run without sas. do you have NBT evo or entry nav? In my case, I have SAS and 5DF active cruise control. Regarding surround view flash problems: they are probably because I didn't done all changes that are needed to surround view: still got PMA low version and no 4 additional ultra sensors for self-parking. Itself surround view works perfectly without proper flash and all needed changes. |
|||
09-09-2022, 18:41 PM,
Post: #12
|
|||
|
|||
RE: BMW G30 Surround View retrofit
I also retrofitted the G30 with 5DN cameras,
I was programming ICAM3 / 6 without additional assistant sensors, TRSVC programmed correctly, all SWFLs, coding also passed, but without replacing the PDC / PMA module and installing additional 4 PMA sensors, the system was impaired, (I coded SAS too) If my post helped you hit the thanks and reputation button!
|
|||
10-09-2022, 14:23 PM,
Post: #13
|
|||
|
|||
RE: BMW G30 Surround View retrofit
Its not related to FA or VCM, G series surround view camera control unit requires certain procedures to program it properly and remove the FFF files.
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
Reputation: +1 - German80 [+1] | |||
01-10-2022, 12:48 PM,
Post: #14
|
|||
|
|||
RE: BMW G30 Surround View retrofit
|
|||
12-12-2022, 07:44 AM,
Post: #15
|
|||
|
|||
RE: BMW G30 Surround View retrofit
Hello.
Can I install only front camera if I have original rear camera with ICAM4 module on BMWG30 2019.Any steps for this retrofit. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content