[ELMEPRO]

Hello, sou car is sitting dead, none can help for this old car, it had completely dead panel changed to new one is there a way to match them or just remove imo in ecu?

AUDI A6 C5 1.8T 1998
ECU LABEL IN ATTACH    

MY TOOLS: vcds, odis, xprog, orange, iprog (all chinamina)

[darek_naprawa]

You can add vcds. The description can be found on the ross tech wiki.

[ELMEPRO]

You can add vcds. The description can be found on the ross tech wiki.

How if i have no access to old cluster pin code?

[alpntrb]

cant you read out dash on bench and then extract pin from it? or is it toasted?

[ELMEPRO]

cant you read out dash on bench and then extract pin from it? or is it toasted?

its dead, i can read pin code from new cluster on bench only, i found vcds manual how to adapt it its imo 2, will try if not what is my options?

[alpntrb]

what mcu it has in it? cant you read it directly?

[ELMEPRO]

what mcu it has in it? cant you read it directly?

sou i opened new panel and it has no 93c66 eeprom inside, where then is stored pin code?

[al70]

Open the old one and read erprom, and post

---

Ohh, no eeprom ,,,,,

[ELMEPRO]

Open the old one and read erprom, and post

---

Ohh, no eeprom ,,,,,

its destroyed unreadable

[alpntrb]

post part numbers for those clusters...