[Nevidimia]

Hello, can you help me with an airbag control module.

the car is after a flood and there are recorded errors that are not deleted 22 pieces - are seen as stored , crash is not saved at current values, 1 - current internal memory error . memory 25LC128 is empty , attach dump from mcu + mem .


 

TIGUAN 5Q0 959 655 BJ.rar
File Type:
Downloaded:	3 times
Size:	4.73 KB

[sokisoki3]

Change used unit.

[Nevidimia]

5Q0 959 655 BT
A2C12701602
VW21

the car is after a flood SRS PCB is damage ,failure , fault . I took a second use SRS unit , all pyro cartridges are ok, there is only one error component protection !
So I put my original processor ( R7F7010423 ) on a solid PCB board , and there are recorded errors that are not deleted 22 pieces - are seen as stored , crash is not saved at current values,
1 - current internal memory error .

orig memory 25LC128 is empty bad , attach dump from orig mcu + mem .


Will you be able to save my VIN ( vin is also displayed in the memory but changed in it at diagnosis shows a second-hand vin ) and component protection data if I send you the dumps from the second use unit ?

TIGUAN 5Q0 959 655 BT.rar
File Type:
Downloaded:	1 times
Size:	4.73 KB

5Q0 959 655 BJ_A2C12701603_VW21_SECOND HAND.rar
File Type:
Downloaded:	3 times
Size:	6.13 KB

Hello, can you help me with an airbag control module.

5Q0 959 655 BT
A2C12701602
VW21

the car is after a flood SRS PCB is damage ,failure , fault . I took a second use Will you be able to save my VIN ( vin is also displayed in the memory but changed in it at diagnosis shows a second-hand vin ) and component protection data if I send you the dumps from the second use unit ?
at the moment the second-hand processor is removed from the PCB board