Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How can i see if icom A2 is origional?
|
07-07-2022, 16:00 PM,
Post: #11
|
|||
|
|||
|
RE: How can i see if icom A2 is origional?
it looks good on pictures...
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
07-07-2022, 16:02 PM,
Post: #12
|
|||
|
|||
|
RE: How can i see if icom A2 is origional?
I would update to newest firmware. Does this give me problems?
|
|||
|
|
|
07-07-2022, 18:29 PM,
Post: #13
|
|||
|
|||
|
RE: How can i see if icom A2 is origional?
I've been using such a clone for quite a few years, after updating the firmware about two years ago, I noticed that ICOM became very unstable. This year, about three months ago, when I wanted to update the firmware to the last one, the whole process was normal and the firmware remained old anyway. Only when I repaired the memory bank (thanks to the advice "ferrum") Icom went through the last firmware update correctly. After the repair I noticed a big improvement in stability. The next step was to change the serial number to one that is correct for ICOM A2. I think you can see that yours is read as ICOM A1. There is a risk that you can catch a fan error that is not in ICOM A2 (everything is described on the forum)
I hope now you understand why I wrote that this ICOM is buggy. |
|||
| Reputation: +1 - Bimmer540 [+1] | |||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
