[Mercbenz58]

Hi All needs some help,  Nissan  350 z z33 the ECU is locked two things is it easy to remove nats. At moment Only way to start car is to disconnect battery leave overnight or at least several hours then put key in and switch to start. Reconnect battery then try to start. If it doesn't quickly start, take key out and put in and then start. Sometime the TCS and eml light come on and no throttle. Again switch of and restart and all can be ok just eml stay on. Launch x431 come up with 2 to 4 codes ECU locked and p1610 or 0605 to sensor. Once you switch of and everything closes down it will not start. Until disconnect of battery.

Thanks in advance

[kanatua]

Hi All needs some help,  Nissan  350 z z33 the ECU is locked two things is it easy to remove nats. At moment Only way to start car is to disconnect battery leave overnight or at least several hours then put key in and switch to start. Reconnect battery then try to start. If it doesn't quickly start, take key out and put in and then start. Sometime the TCS and eml light come on and no throttle. Again switch of and restart and all can be ok just eml stay on. Launch x431 come up with 2 to 4 codes ECU locked and p1610 or 0605 to sensor. Once you switch of and everything closes down it will not start. Until disconnect of battery.

Thanks in advance

this case should be the bcm problem