Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
PCM Flash Module 77 EDC16C10
22-07-2022, 10:11 AM,
Post: #1
|
|||
|
|||
PCM Flash Module 77 EDC16C10
Hello. I have ECU from 2006 Toyota YARIS. It is Bosch 0281012517 EDC16C10. I'm using module 77 with my Scanmatik 2 pro with the Boot cable (3 leds) according to Pcmflash schematic. I connect 12V to pins 1+17, Neg to pin 3, K-Line to pin 79, GPT1 to pin 107, GPT2 to pin 112. When I try to identify the ECU it says "waiting for ECU to become ready" and then in couple of seconds Failure. I have tried to swap the GPT's but the result is the same. I'm missing something? Any help will be appreciated! I'm trying to clone this ECU.
Thank you! |
|||
22-07-2022, 10:55 AM,
Post: #2
|
|||
|
|||
RE: PCM Flash Module 77 EDC16C10
try pin 5 for ground
|
|||
22-07-2022, 16:25 PM,
Post: #3
|
|||
|
|||
RE: PCM Flash Module 77 EDC16C10
(22-07-2022, 10:11 AM)vioilio Wrote: Hello. I have ECU from 2006 Toyota YARIS. It is Bosch 0281012517 EDC16C10. I'm using module 77 with my Scanmatik 2 pro with the Boot cable (3 leds) according to Pcmflash schematic. I connect 12V to pins 1+17, Neg to pin 3, K-Line to pin 79, GPT1 to pin 107, GPT2 to pin 112. When I try to identify the ECU it says "waiting for ECU to become ready" and then in couple of seconds Failure. I have tried to swap the GPT's but the result is the same. I'm missing something? Any help will be appreciated! I'm trying to clone this ECU. (22-07-2022, 10:55 AM)moriaz Wrote: try pin 5 for ground I have tired this but the result is the same! (22-07-2022, 15:50 PM)amaflo Wrote: ........................This is exactly how i connect it but unfortunately it does not work. I have 2 of those ecus and the result is the same on both. |
|||
23-07-2022, 19:24 PM,
Post: #4
|
|||
|
|||
RE: PCM Flash Module 77 EDC16C10
Anyone with any suggestions?
|
|||
23-07-2022, 19:35 PM,
Post: #5
|
|||
|
|||
RE: PCM Flash Module 77 EDC16C10
You have good 12v power supply ?
|
|||
23-07-2022, 19:37 PM,
Post: #6
|
|||
|
|||
RE: PCM Flash Module 77 EDC16C10
HI
try this connection |