[anstr]

Hi All,

I've started with retrofiting few things on my 2017 F15 US import. Added 5A1(led lights), 502(head lamps washers) and 3AC (auto tow hook). Now I wanted also to code 5AC (high beam assist). I've changed the stalk to have auto button on it, but it'ś not working.

Car is already equipped with 05AG (Lane change warning) 05AS (Driving Assistant) and 08S4 (Decoding, variable light distribution) with 7E, BE and BF FSC.

I've ran coding verification on all NCD's after adding 5AC to FA/VO and wondering if I'm missing anything - any suggestions guys ?

Outside of the below I aslo see changes in ICM, ICAM but those are related to 3AC and 502.

BDC_BODY

ComAdapterPdu_095_Objektdaten_Stufenloser_Fernlicht_Assistent

NCD1: aktiv (01) NCD2: inaktiv (00)

ComAdapterPdu_292_Steuerung_Fernlicht-Assistent
NCD1: aktiv (01) NCD2: inaktiv (00)

ComAdapterPdu_437_Status_Kamera_Kalibrierung
NCD1: aktiv (01) NCD2: inaktiv (00)

FLA_AKTIVIERUNG
NCD1: LDS_in_A (01) NCD2: nicht_aktiv (00)

C_HBA_ENA
NCD1: F015_enable (01) NCD2: F015_disable (00)

C_HBA_CAM_POS_Z
NCD1: F015_KafasHigh (7E) NCD2: F015_KafasLow (75)

LIN_VARIANTE_SZL
NCD1: szl_aic_4Band_fla (08) NCD2: szl_aic_4Band (05)


DKOMBI (seems this is triggered by 5AC)

ST_MAB_ASST_TIMEOUT

NCD1: aktiv (01) NCD2: nicht_aktiv (00)

ST_MAB_ASST_APPL
NCD1: aktiv (01) NCD2: nicht_aktiv (00)

KAFAS2

FLA_ON_OFF

NCD1: FLA_on (01) NCD2: FLA_off (00)

ALLOW_SENS_CHANGE
NCD1: no_sensitivity_change (00) NCD2: sensitivity_changeble (01)

GLAREFREE_HIGHBEAM_ENABLED
NCD1: glarfreeHB_on_F001 (01) NCD2: glarfreeHB_on_I001_off (00)

HU_NBT2


Funny enaugh no changes was calculated by verifincation, but I assume this line needs to be amended

3000 HIGH_BEAM_ASSISTANT to aktiv