[Tekero]

Here is another option I was buy some tool...
This work can be done with software for VCDS V1 / VCDS Clone like in picture.
They have option for every vag clusters

[jacog]

There a link to the VC add km tool inside MIB solutions archive on meganz: see post MIB2 Solution Harman/Delphi/Technisat on this forum. I have also arduino based solution.

[Subzdarg]

i have this program i can share wouldnt mind the above one if anyone has please

Tool can only ADD KM / Miles to your cluster!

Required hardware:

1.China Clone VCDS V1 (ATmega, HEX-CAN + USB)

2. Original VCDS V1 HEX-CAN + USB has to be set to "dumb" mode. Uncheck the "boot in intelligent mode" box in VCDS Options Settings tab, then close and restart VCDS, then close VCDS again.

Next, open the VC Mileage Tool and check if it connects

NOTE: Virus / Trojan Warning

Some virus scanner will give you a trojan waring on this file.

EG checked on https://www.virustotal.com/ will give you 3 out of 70 scanners with a positive find:

Scanner Detected

Bkav W32.AIDetectVM.malware1

Cylance Unsafe

VBA32 TScope.Trojan.Delf

Stay safe and decide on your own!

Rule 3: Do not Post Links on the Board! External links must be attached in a notepad file.
Thanks, Admin
Like this 

[Tekero]

It's wont work good with audi clusters. I have my program with little changes and than work perfect

[Subzdarg]

works fine on audi has audi option
VW/SEAT/SKODA PIN OUT

PIN 1 +12V
PIN 10 GND

PIN 17 CAN LOW
PIN 18 CAN HIGH

AUDI PIN OUT

PIN 3 CAN LOW
PIN 4 CAN HIGH

PIN 30 GND
PIN 32 +12V

Tool can only ADD KM / Miles to your cluster!

Required hardware:

1.China Clone VCDS V1 (ATmega, HEX-CAN + USB)

[spacewalker]

My latest simulate speed in MQb cluster is 60km within 2min , so is about 1800km/h

[jacog]

I could not get more that 302km of distance per h. ESP_24 frame has 11-bit wegimp field, 1 bit of overflow and 1 bit called ESP_QBit_Wegimp_VA. Do you know meaning of that last field?

[ltujustas]

i have this program i can share wouldnt mind the above one if anyone has please

Tool can only ADD KM / Miles to your cluster!

Required hardware:

1.China Clone VCDS V1 (ATmega, HEX-CAN + USB)

2. Original VCDS V1 HEX-CAN + USB has to be set to "dumb" mode. Uncheck the "boot in intelligent mode" box in VCDS Options Settings tab, then close and restart VCDS, then close VCDS again.

Next, open the VC Mileage Tool and check if it connects

NOTE: Virus / Trojan Warning

Some virus scanner will give you a trojan waring on this file.

EG checked on https://www.virustotal.com/ will give you 3 out of 70 scanners with a positive find:

Scanner Detected

Bkav W32.AIDetectVM.malware1

Cylance Unsafe

VBA32 TScope.Trojan.Delf

Stay safe and decide on your own!

Rule 3: Do not Post Links on the Board! External links must be attached in a notepad file.
Thanks, Admin
Like this 

Can reupload software ?

[Thegrimreaper]

the software i have is slow - 4500km in 24 hours, is there a quicker software?

[Subzdarg]

vc.txt
File Type:
Downloaded:	34 times
Size:	162 bytes

    please REP an thanks then pm for pass or if link down

works fine on audi has audi option
VW/SEAT/SKODA PIN OUT

PIN 1 +12V
PIN 10 GND

PIN 17 CAN LOW
PIN 18 CAN HIGH

AUDI PIN OUT

PIN 3 CAN LOW
PIN 4 CAN HIGH

PIN 30 GND
PIN 32 +12V

Tool can only ADD KM / Miles to your cluster!

Required hardware:

1.China Clone VCDS V1 (ATmega, HEX-CAN + USB)
2. Original VCDS V1 HEX-CAN + USB has to be set to "dumb" mode. Uncheck the "boot in intelligent mode" box in VCDS Options Settings tab, then close and restart VCDS, then close VCDS again.



Next, open the VC Mileage Tool and check if it connects



NOTE: Virus / Trojan Warning



Some virus scanner will give you a trojan waring on this file.



EG checked on https://www.virustotal.com/ will give you 3 out of 70 scanners with a positive find:



Scanner Detected



Bkav W32.AIDetectVM.malware1



Cylance Unsafe



VBA32 TScope.Trojan.Delf


Stay safe and decide on your own!