Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
A4 8K facelift from halogen to xenon
27-07-2022, 22:46 PM,
Post: #1
|
|||
|
|||
A4 8K facelift from halogen to xenon
Hi everyone , i did a retrofit on audi A4 8K 2013 facelift from halogen to bi-xenon LED.
Installed Kufatec wiring harness on each light, try few coding but nothing was working, xenon blinks and shut off. After few research i found that i need to replace BCM, change few wires like KUFATEC instructions says remove CP, code with VCDS. Now everything is working well except DRL led Can someone please help me ? Thanks If this post helped you don't forget to press rep and thanks buttons
|
|||
28-07-2022, 00:43 AM,
Post: #2
|
|||
|
|||
RE: A4 8K facelift from halogen to xenon
If you code DRL LED with xenon look at percentage of drl (LED) it shoild be 10% . If it is not 10 it will not work .
|
|||
28-07-2022, 00:44 AM,
Post: #3
|
|||
|
|||
RE: A4 8K facelift from halogen to xenon
Have you replaced the BCM with the right index?
|
|||
28-07-2022, 09:32 AM,
Post: #4
|
|||
|
|||
RE: A4 8K facelift from halogen to xenon
(28-07-2022, 00:44 AM)pveeningen Wrote: Have you replaced the BCM with the right index? I hope, can you tell me ? Please, if someone can share original wiring diagram for halogen headlight it would be great to verify if everything is ok If this post helped you don't forget to press rep and thanks buttons
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content