[Albert2K6]

Hi can you help, me to have immo off of this BMW 530D. i leave you attached two Flash file , Eeprom inmo is inside ECU. Plug EWS3 disconnect correct??

Ecu Info:
EDC15C4 (BMW DDE4)
SW: 1037351761
Ver.SW: 7789376
Number ECU: 0 281 010 314 

THX
Best Regards

[egoy936]

Here is your file with EWS del. Correct che

ewsdel.zip
File Type:
Downloaded:	54 times
Size:	139.24 KB

cksum with your tool

[Albert2K6]

Here is your file with EWS del. Correct checksum with your tool

Ok remove plug immobox ??

Thx.

[egoy936]

If the car cranks you can leave it.

If the car doesn’t crank remove ews module and bridge connector as shown in attached image!

Here is your file with EWS del. Correct checksum with your tool

Ok remove plug immobox ??

Thx.

[12manux]

did it worked??

[Albert2K6]

If the car cranks you can leave it.

If the car doesn’t crank remove ews module and bridge connector as shown in attached image!

Here is your file with EWS del. Correct checksum with your tool

Ok remove plug immobox ??

Thx.

Hello to all. Good morning.

I have already tried it, it doesn't work, it doesn't start the engine. 
disconnect immobilizer plug does not work. 
and the jumper connector box ews3. something immo off fail can be

it may not be right correctly checkum.... ????

thank you very much
thx

[egoy936]

If the car cranks you can leave it.

If the car doesn’t crank remove ews module and bridge connector as shown in attached image!

Here is your file with EWS del. Correct checksum with your tool

Ok remove plug immobox ??

Thx.

Hello to all. Good morning.

I have already tried it, it doesn't work, it doesn't start the engine. 
disconnect immobilizer plug does not work. 
and the jumper connector box ews3. something immo off fail can be

it may not be right correctly checkum.... ????

thank you very much
thx




Try This I corrected checksum. 

Flash_Orig_Mod_EWSDEL.zip
File Type:
Downloaded:	43 times
Size:	139.27 KB

[Albert2K6]

If the car cranks you can leave it.

If the car doesn’t crank remove ews module and bridge connector as shown in attached image!

Here is your file with EWS del. Correct checksum with your tool

Ok remove plug immobox ??

Thx.

Hello to all. Good morning.

I have already tried it, it doesn't work, it doesn't start the engine. 
disconnect immobilizer plug does not work. 
and the jumper connector box ews3. something immo off fail can be

it may not be right correctly checkum.... ????

thank you very much
thx




Try This I corrected checksum. 

 Yeah!!!! yesss omgg good perfect!!!!! 

thank you very much
thx..
I am going to close the thread