[FUG]

Hi all,

Hoping someone can help with this.

Carried out some coding today on a pre-lci E60 fitted with LM2

Car came fitted with halogens from factory.

Car owner has fitted halogen LCI headlamps and LCI tail lights.

The owner of the car contacted me in regards to coding the car for him. I added +MUEB to the VO and default coded the LMA and this appeared to have the lights working correctly.

Forgot to test the main beams and car owner has now stated the main beams don’t work post coding.

I assume this is a wiring error?

Any help would be appreciated.

Thanks

Try this MAN file FSW_PSW , you dont have to add any VO , and check the NEWTIS wiring for the LCI is very intuitive, also for the TailLights you have to add few pins in LM2, Port 62 and port 5 to the right and left tailight.

[AlpineF30]

Massive thank you to @GoNz0 for all his help.

For anybody who runs into this issue in future once you change the VO and find no high beams set the following to werte_2

PWM_ANSTEUERUNG_FL_34

[GoNz0-]

Glad it worked