[Jalami]

I need to register a battery to a bmw f30, is it possible to do it with Tool32. ,, Esys???
(same battery amp)

[FUG]

You can use ISTA

[Jalami]

You can use ISTA

I know.  I wanted to do it with tool32.

[TheNine90]

With the choice of the engine control unit PRG file, e.g.: N57 = D72N57A0.prg use argument: control_battery exchange_register

[Bimmer540]

You can use ISTA

I know.  I wanted to do it with tool32.

Why with Tool32, is it better then ista?

[bmchicago]

sometimes it is better to use Tool32 faster than waiting for ISTA. More difficult to clear all faults after registration, however on 2010-2013 vehicles with FRM3, its best to avoid ISTA if vehicle is out of warranty to prevent a repair.

[Bimmer540]

You can also use Bimmerlink or Carly, or inpa.

[Enabled]

You can use ISTA

I know.  I wanted to do it with tool32.

Why with Tool32, is it better then ista?

Everything, I mean absolutely everything: ISTA, INPA, Bimmerlink, Carly, etc. all use the tool32 commands. Tool32 is the source of everything. Of course it's better in many ways.

[Jalami]

You can use ISTA

I know.  I wanted to do it with tool32.

Why with Tool32, is it better then ista?

Everything, I mean absolutely everything: ISTA, INPA, Bimmerlink, Carly, etc. all use the tool32 commands. Tool32 is the source of everything. Of course it's better in many ways.

Solved with tool32.  fast and effective

[Node]

You can use ISTA

I know.  I wanted to do it with tool32.

Why with Tool32, is it better then ista?

Everything, I mean absolutely everything: ISTA, INPA, Bimmerlink, Carly, etc. all use the tool32 commands. Tool32 is the source of everything. Of course it's better in many ways.

Oh, so Carly has windows emulator inside? As tool32 is windows software... That was a good laugh