Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ G30 ACC retrofit flexray issue SOLVED
22-08-2022, 10:14 AM,
Post: #11
|
|||
|
|||
RE: G30 ACC retrofit flexray issue
if you click on "STATUS_VCM_GET_ECU_LIST_FLEXRAY" do you get SAS on the list?
|
|||
22-08-2022, 11:38 AM,
(This post was last modified: 22-08-2022, 12:05 PM by mr_nitroz.)
Post: #12
|
|||
|
|||
RE: G30 ACC retrofit flexray issue
No, here is my actual flexray channel overview and flexray VCM read.
If I use function STEUERN_DIAG_PLUS_FLEXRAY I get PFAD 3 open with other channels but no difference... |
|||
22-08-2022, 17:54 PM,
Post: #13
|
|||
|
|||
RE: G30 ACC retrofit flexray issue
PROBLEM SOLVED!!!!
Thanks everybody for great informations and help. The magic think I had to make is write SVT target with manually added SAS via VCM, as sguzzel wrote in first post. I was doing it bad way as I was operating with SVT actual (ist) and not SVT target (soll). I learned a lot from this issue. Hope it will help to someone else too. After that SAS appeared in unit list and it was a peace of cake then... I coded it successfully, updated SAS to car´s i-level, initialisated flexray via tool32, deleted all errors and went for a test drive. |
|||
Reputation: +2 - al70 [+1] , sebastianfernandes [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content