[tonkostz]

I have XDOS 06.2021 set up for VXDIAG C6 and DAS is working good. Problem is with Xentry - when it tries to connect to the mux, Xentry program closes immediately.

I have installed latest vx manager, updated C6 firmware to the latest version, license is updated, BENZ driver is updated.

I tried on 06.2022 and it is the same but on 09.2022 is working!

What could be the issue?

Thanks!

[ross2018]

Bad install, bad fixes on other xentry.

[tonkostz]

Problem seems to be solved for now. When i install the latest vxdiag manager 1.8.9.0601 i should not update the BENZ driver through internet. I leave it with the driver that comes with the vxdiag manager.
As soon as i update the BENZ driver, Xentry start closing when trying to connect to C6.
On 09.2022 updating the BENZ driver does not have such effect and all is working.
So the problem seems to be in vxdiag.

[gcs190]

A couple of days ago I saw something similar with a VXdiag, it would not update to 1.9.2.1 and not only did it not work in xentry but it even closed itself or did not close completely and the VCI lock remained present even without Xentry open .

[aaronpaul]

Hello gcs190 why XPT close button, not work need to close with Diagnosis stop any fix for this

[gcs190]

Hello gcs190 why XPT close button, not work need to close with Diagnosis stop any fix for this

That is because you will have eliminated the login screen, it is the same if it is PT or XDOS, if you want it to work, revert that modification and use the Offline user.

[aaronpaul]

Thanks for your clarification you are doing a good job for us as a teacher