Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ OP-COM - SW CAN Not working at all.
28-08-2022, 05:34 AM,
Post: #11
RE: OP-COM - SW CAN Not working at all.
Using a hot air soldering/desoldering station ( if it has an iron soldering too then it will be better ) this will be an itsy bitsy job.
Good luck
[+] 1 user says Thank You to mattydr67 for this post
29-08-2022, 18:00 PM,
Post: #12
RE: OP-COM - SW CAN Not working at all.
(28-08-2022, 05:34 AM)mattydr67 Wrote:  Using a hot air soldering/desoldering station ( if it has an iron soldering too then it will be better ) this will be an itsy bitsy job.
Good luck

Problem solved. 
I replaced the SW Can transceiver (as pictured) and communication was back.

Thanks Matty.
[+] 1 user says Thank You to Mario68 for this post
05-09-2022, 15:30 PM,
Post: #13
RE: OP-COM - SW CAN Not working at all.
Ok this thread can be closed. The swcan IC was good. there was all that time short in one of the pull up resistors that go from swcan controler to the mcu. removed the short and now the op com works on 100%.


Possibly Related Threads…
Thread Author Replies Views Last Post
  info sps cvn not working Robert36pl 2 1,067 22-11-2018, 21:37 PM
Last Post: Robert36pl
  SPS not working Renopower 5 2,222 19-11-2015, 23:52 PM
Last Post: vagvag
KOpel MDI not working dyzol 3 1,299 14-10-2015, 23:57 PM
Last Post: gixerjd
KOpel Corsa C,central locking not working-BCM repair(SOLVED) grmsek.damjan 0 2,195 16-06-2015, 08:02 AM
Last Post: grmsek.damjan

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content