[damir195]

hello mate's,

can someone virginaze dl501 tcu, 

backgound: i have one audi a6 3.0tdi mj: 2012, 

the car comes to me with broken s tronic tcu, i am not able to read the tcu (death)

so i get new one used tcu with all numbers matching, tryed with odis online to code it 

but that is not possible the reason is vin is not the same like the vin from the car,

i have the full backup of the new (used) tcu made with acdp and kess3 

i will be happy to pay for your service

br

[AZCKNCLLC]

If you can extract the immo data from the ecu or immobilzer, i can modify the data inside the tcu to match. Need VIN, CS & MAC.

Feel free to post ecu dumps or immo dumps and i can extract immo data and transfer it to the tcu.

[damir195]

If you can extract the immo data from the ecu or immobilzer, i can modify the data inside the tcu to match. Need VIN, CS & MAC.

Feel free to post ecu dumps or immo dumps and i can extract immo data and transfer it to the tcu.

here the ecu eeprom and micro, hope you can help me

br

[heshamzn]

Need Immo Data from cluster

[damir195]

can i use the immo data from the ecu or are they not the same like in tcu

[AZCKNCLLC]

here is new modified tcu eeprom.

[aspy39]

have you tried flashing to the correct software version for your vehicle then using odis online, ive never had any issues using used units

[damir195]

have you tried flashing to the correct software version for your vehicle then using odis online, ive never had any issues using used units

the car is from one friend and i dont know what sw was before on the old tcu, 
i dont have any logs from the car and i cant find out what sw version is for this car
i have all audi flash data but what should i flash

[aspy39]

if you have access to partslink24 or similar parts catalogue you can find the sofware info by looking at the tcu section, it should give you the info for your vehicle