ATTENTION !! Users which have not any posts were deleted !
  1. AutoHex II

  2. New Emulator

  3. Immo Bypass

  4. Julie Emulator

  5. AUTO-CHIPS



Solved ✔ I need Simos PPD1.2 data transfering
22-05-2020, 07:31 AM, (This post was last modified: 23-05-2020, 11:33 AM by raffy haddad.)
Post: #1
I need Simos PPD1.2 data transfering
I have a damaged ecu, impossible read on BDM.
I bought a new(used ecu PPD1.2) with same HW number.

I read info with FVDI from instrument.

VIN: VSSZZZ1PZ8R017988
S/N: EZ7Z0G3880496
PIN: 09150
CS: D2 F2 EC 93 B7 83 6E
MAC: 31 0C 89 82
Status: 00 00 FE FA FE
Config: F1 01 06 22 05 11


Somebody can transfering this datas to ecu eeprom ?

Unfortunatelly, FVDI not was mine.

I attached new ecu flash, and eeprom....

Thanks in advance


Attached Files
link.txt
File Type: .txt
Downloaded: 1 times
Size: 73 bytes

22-05-2020, 08:06 AM, (This post was last modified: 22-05-2020, 08:06 AM by ROD-BENDERS.)
Post: #2
RE: I need Simos PPD1.2 data transfering
(22-05-2020, 07:31 AM)Stig33 Wrote:  I have a damaged ecu, impossible read on BDM.
I bought a new(used ecu PPD1.2) with same HW number.

I read info with FVDI from instrument.

VIN: VSSZZZ1PZ8R017988
S/N: EZ7Z0G3880496
PIN: 09150
CS: D2 F2 EC 93 B7 83 6E
MAC: 31 0C 89 82
Status: 00 00 FE FA FE
Config: F1 01 06 22 05 11


Somebody can transfering this datas to ecu eeprom ?

Unfortunatelly, FVDI not was mine.

I attached new ecu flash, and eeprom....

Thanks in advance

Here Stig you can try smile


Attached Files
FULL BACKUPeep-newdata.rar
File Type: .rar
Downloaded: 1 times
Size: 1.29 KB


ADBLUE-DTC-FAP-FLAP-EGR-LAMBDA-TQM-TPROT-VMAX-NOX-START/STOP-SPECIAL- LAUNCH CONTROL-POPCORN HARDCUT- VAG MEDCx17 CLONE-PCR2.1 CLONE FROM MCU ID AND EPROM-VAG IMMO OFF 2015+ yes - ALL VAG CS-MAC EXTRACTION here: bowtime skype:  PM
For tuning I ask : 1. Zenter Performance tuning yes 2Remap Ross tuning  yes 3. Vision diesel tuning  yes   4. ---- bow
Reputation: +2 - dabaca [+1] , Stig33 [+1]
[-] The following 1 user says Thank You to ROD-BENDERS for this post:
  • Stig33
22-05-2020, 08:22 AM,
Post: #3
RE: I need Simos PPD1.2 data transfering
(22-05-2020, 08:06 AM)ROD-BENDERS Wrote:  
(22-05-2020, 07:31 AM)Stig33 Wrote:  I have a damaged ecu, impossible read on BDM.
I bought a new(used ecu PPD1.2) with same HW number.

I read info with FVDI from instrument.

VIN: VSSZZZ1PZ8R017988
S/N: EZ7Z0G3880496
PIN: 09150
CS: D2 F2 EC 93 B7 83 6E
MAC: 31 0C 89 82
Status: 00 00 FE FA FE
Config: F1 01 06 22 05 11


Somebody can transfering this datas to ecu eeprom ?

Unfortunatelly, FVDI not was mine.

I attached new ecu flash, and eeprom....

Thanks in advance

Here Stig you can try smile


Many Thanks Rob, I will try it soon, and I will sending report to you.
[-] The following 1 user says Thank You to Stig33 for this post:
  • ROD-BENDERS
22-05-2020, 10:03 AM,
Post: #4
RE: I need Simos PPD1.2 data transfering
Not working...Car staring and after 2 second stoping....DTC: Blocked immo
22-05-2020, 10:05 AM, (This post was last modified: 22-05-2020, 17:02 PM by ROD-BENDERS.)
Post: #5
RE: I need Simos PPD1.2 data transfering
was fvdi clone ? do you have anything else that can read CS and MAC data from car ?
Your original replacement ecu data is (new ecu):

VIN:  VSSZZZ1PZ7R097122

CS:    3A3CDBEDC660
MAC:  ADFB5404
PIN:  00746
IMMO 4
If you cannot read the old ecu eprom with a programmer, then you may need to use an immo 4 emulator.

I recommend that you open the ORI ecu and read the eprom with a programmer..... then post the dump here. nod

ADBLUE-DTC-FAP-FLAP-EGR-LAMBDA-TQM-TPROT-VMAX-NOX-START/STOP-SPECIAL- LAUNCH CONTROL-POPCORN HARDCUT- VAG MEDCx17 CLONE-PCR2.1 CLONE FROM MCU ID AND EPROM-VAG IMMO OFF 2015+ yes - ALL VAG CS-MAC EXTRACTION here: bowtime skype:  PM
For tuning I ask : 1. Zenter Performance tuning yes 2Remap Ross tuning  yes 3. Vision diesel tuning  yes   4. ---- bow
Reputation: +3 - raffy haddad [+1] , Stig33 [+1] , danyguit2000 [+1]
[-] The following 3 users say Thank You to ROD-BENDERS for this post:
  • danyguit2000, raffy haddad, Stig33
23-05-2020, 09:03 AM,
Post: #6
RE: I need Simos PPD1.2 data transfering
(22-05-2020, 10:05 AM)ROD-BENDERS Wrote:  was fvdi clone ? do you have anything else that can read CS and MAC data from car ?
Your original replacement ecu data is (new ecu):

VIN:  VSSZZZ1PZ7R097122

CS:    3A3CDBEDC660
MAC:  ADFB5404
PIN:  00746
IMMO 4
If you cannot read the old ecu eprom with a programmer, then you may need to use an immo 4 emulator.

I recommend that you open the ORI ecu and read the eprom with a programmer..... then post the dump here. nod

Thanks for help Rob. We adapt with ONLINE ODIS..
[-] The following 2 users say Thank You to Stig33 for this post:
  • danyguit2000, ROD-BENDERS


Possibly Related Threads…
Thread Author Replies Views Last Post
  Simos 22 Ford Fiesta ECU Cloning Willinickersen 0 69 01-06-2020, 15:22 PM
Last Post: Willinickersen
  Simos 12.1 cloning audi666 1 164 26-05-2020, 19:37 PM
Last Post: awful
ZVW IMMO OFF Simos 3PC 036906033D 5WP40049 ecuboost 0 83 26-05-2020, 08:09 AM
Last Post: ecuboost
  Solved ✔ 06A906019BJ SIMOS 2.1B IMMO RusselP 2 241 24-05-2020, 16:56 PM
Last Post: RusselP
ZSeat Solved ✔ Seat IBIZA Simos 3PE immo off masculine 5 200 22-05-2020, 06:58 AM
Last Post: masculine
  Audi A# Simos 3.3 immo off svmipmf 3 145 20-05-2020, 07:29 AM
Last Post: dabaca
ZVW Need Immo Off Simos 3PG JCAsystems 1 219 15-05-2020, 17:58 PM
Last Post: dabaca
ZVW Solved ✔ Immo data PCR2.1 VW Golf jasiu_chmura 14 829 15-05-2020, 08:47 AM
Last Post: ROD-BENDERS
JAlfa Panda 2005 PCF7941 remote data castin 0 114 09-05-2020, 10:39 AM
Last Post: castin
  simos pcr 2.1 cloning BobbySD 2 507 04-04-2020, 00:38 AM
Last Post: BobbySD

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content