Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ODIS + Tactrix Openport clone
09-04-2024, 14:14 PM,
Post: #1
|
|||
|
|||
ODIS + Tactrix Openport clone
Hi all,
I currently have a Tactrix clone, which works fine with Xentry. However, for a while now I am trying to get it to work with ODIS. In a lot of instances I can select the Openport in ODIS but and it tests out correctly but when I try to connect to a car, it gives an error. Please see attachments. Does anyone have an idea how to fix this? KR Mike |
|||
09-04-2024, 14:37 PM,
Post: #2
|
|||
|
|||
RE: ODIS + Tactrix Openport clone
For me never works on Odis 6.2 and newer. If you want to works with J2534, W10-W11 is required and cheap device for example, Godiag J2534 (not detect ignition) or VNCI that works "similar" to 5054 or 6154.
|
|||
09-04-2024, 15:50 PM,
Post: #3
|
|||
|
|||
RE: ODIS + Tactrix Openport clone
(09-04-2024, 14:14 PM)Prazcon Wrote: I currently have a Tactrix clone, which works fine with Xentry. However, for a while now I am trying to get it to work with ODIS. Some driver issues. I have no experience with Tactrix tools, but if the clone is using own drivers (not the same as the legit device) - this might be it, and it will never get fixed, as there is usually no support for clones. If it can work with the official driver from Tactrix website - well, try your luck and troubleshoot this issue with Tactrix dev team. (although I doubt it) |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content