Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ESYS / ICOM No Connection
|
31-08-2022, 18:41 PM,
Post: #1
|
|||
|
|||
ESYS / ICOM No Connection
Hi!
ICOM works with ISTA+. Not with ESYS. I reserve the IP at itoolradar. I enter the displayed IP in the ESYS connection manager +:50160. ZGW is also not available. Enet cable also works with ESYS, just not ICOM. What am I doing wrong? Thanks. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
31-08-2022, 18:53 PM,
Post: #2
|
|||
|
|||
|
RE: ESYS / ICOM No Connection
Did you fill in ip adres in Ediabas.ini on C Ediabas, bin, Ediabas.ini
|
|||
|
|
|
31-08-2022, 18:57 PM,
Post: #3
|
|||
|
|||
|
RE: ESYS / ICOM No Connection
no where exactly?
The IP changes, do you have to do it every time? |
|||
|
|
|
31-08-2022, 19:01 PM,
Post: #4
|
|||
|
|||
RE: ESYS / ICOM No Connection
(31-08-2022, 18:41 PM)nobbynobbs Wrote: Hi! Try diagnose with ista. After ista ends, without disconnecting, try connect with esys via "icom/ethernet" |
|||
|
|
|
31-08-2022, 19:04 PM,
Post: #5
|
|||
|
|||
|
RE: ESYS / ICOM No Connection
@cursor: Leave ISTA open, don't exit?
|
|||
|
|
|
31-08-2022, 19:10 PM,
Post: #6
|
|||
|
|||
RE: ESYS / ICOM No Connection
(31-08-2022, 18:53 PM)Bmw325x Wrote: Did you fill in ip adres in Ediabas.ini on C Ediabas, bin, Ediabas.ini I think you absolutely not familiar with E-Sys and Ediabas. What has Ediabas settings with E-Sys todo? |
|||
|
|
|
31-08-2022, 19:17 PM,
Post: #7
|
|||
|
|||
|
RE: ESYS / ICOM No Connection
With Dr.Gini reserve the icom.
in E-Sys -> Connection -> iCOM/ethernet -> put the ip from ur icom Only eNET can find the ZGW directly. |
|||
|
|
|
31-08-2022, 20:25 PM,
(This post was last modified: 31-08-2022, 20:26 PM by Bmw325x.)
Post: #8
|
|||
|
|||
RE: ESYS / ICOM No Connection
(31-08-2022, 19:17 PM)DieStream Wrote: With Dr.Gini reserve the icom. Yes thats what i mean. (31-08-2022, 19:10 PM)Sedoy Wrote:Sorry my fault. Ip adres fiill in Esys(31-08-2022, 18:53 PM)Bmw325x Wrote: Did you fill in ip adres in Ediabas.ini on C Ediabas, bin, Ediabas.ini |
|||
|
|
|
31-08-2022, 20:38 PM,
(This post was last modified: 31-08-2022, 20:41 PM by Tabby123.)
Post: #9
|
|||
|
|||
RE: ESYS / ICOM No Connection
(31-08-2022, 18:41 PM)nobbynobbs Wrote: Hi! You don't need to reserve the IP at itoolradar. Just enter IP into esys connection manager as you mentioned. If it doesn't work, disconnect battery from vehicle, reconnect after 3-4 minutes and try again (31-08-2022, 18:57 PM)nobbynobbs Wrote: no where exactly? Yes you'll need to change IP in esys connection manager evertime it changes |
|||
|
|
|
01-09-2022, 04:32 AM,
Post: #10
|
|||
|
|||
|
RE: ESYS / ICOM No Connection
if you need help with teamviwer when i have time i can do
|
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Carplay loses connection | marcospoffo | 2 | 146 |
2 hours ago Last Post: marcospoffo |
|
| MGU Bench connection | kimz | 2 | 80 |
2 hours ago Last Post: kimz |
|
| Esys ultra | Erezbmwm | 4 | 540 |
Yesterday, 02:51 AM Last Post: sacaman |
|
| [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS | hashtagmaster | 105 | 35,838 |
17-04-2024, 18:36 PM Last Post: hashtagmaster |
|
|
|
ICOM Firmware (NEXT & A2) always current! | Vojno | 206 | 42,939 |
12-04-2024, 23:36 PM Last Post: bennymx |
|
|
Poor wifi signal from new ICOM's | bmchicago | 3 | 306 |
12-04-2024, 18:55 PM Last Post: Node |
|
|
Flash MPPK software 20D B47 (Esys) | ruben_17non | 5 | 564 |
10-04-2024, 21:38 PM Last Post: ruben_17non |
| GenEsys Creator (New Tool FA ESYS) | scorpium59 | 410 | 30,261 |
08-04-2024, 13:05 PM Last Post: johnautotec |
|
|
|
BimmerUtility vs Esys Launchers | diagso | 562 | 109,424 |
07-04-2024, 17:48 PM Last Post: vld |
|
|
xdrive off with esys without error in dash | dankocg | 14 | 2,822 |
07-04-2024, 08:57 AM Last Post: Fatalix |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content
