Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Simos PC2.1 communication error
14-05-2019, 08:12 AM,
Post: #11
|
|||
|
|||
RE: Simos PC2.1 communication error
what do you mean by bricked? cuz many times ecu can be revived with right tools/knowledge
Fileservice Dyno Tested: Stage 1,2,3 , Manual: DPF off, EGR off, AdBlue
https://www.tuning-makarska.com/ We offer free slave tools ! Official Magicmotorsport Distributor Official Autotuner Distributor Official Alientech Distributor DAMOS List: https://docs.google.com/document/d/1gpra...zynXdvmLw/ |
|||
14-05-2019, 09:02 AM,
Post: #12
|
|||
|
|||
RE: Simos PC2.1 communication error
I got the message "communication problem" in kess, Fgtech and VCP PRO. Have only tried to unlock with the one adapter "simos PC2.1 unlock" from the 22 piece adapter kit I've bought with the stainless steel BDM Frame. After this didn't work, I checked the adapter, and there is some totally wrong soldering....
Back to basic....account reset to 2018
Learning by reading, learning by doing, learning by experience |
|||
14-05-2019, 09:33 AM,
Post: #13
|
|||
|
|||
RE: Simos PC2.1 communication error
connect to the ecu directly using resistors and see if it can be read, if not then yes likely you have damaged ecu by using this adapter if you say it have 'wrong soldering'
learn and next time check adapter before connecting i am all for adapters but 90% of time, i just solder |
|||
14-05-2019, 10:42 AM,
Post: #14
|
|||
|
|||
RE: Simos PC2.1 communication error
(14-05-2019, 09:02 AM)Willinickersen Wrote: I got the message "communication problem" in kess, Fgtech and VCP PRO. Have only tried to unlock with the one adapter "simos PC2.1 unlock" from the 22 piece adapter kit I've bought with the stainless steel BDM Frame. After this didn't work, I checked the adapter, and there is some totally wrong soldering.... Fastest and easy job is buy working ecu with same hw and sw and mount it on car then go to official dealer to restore...otherwise look for someone with Avdi to do job. Pcr 2.1 first time read bdm then unlock and write forever by obd, in extreme case flash ori file and car starts everytime u want! |
|||
15-05-2019, 06:55 AM,
(This post was last modified: 15-05-2019, 07:01 AM by Willinickersen.)
Post: #15
|
|||
|
|||
RE: Simos PC2.1 communication error
(14-05-2019, 09:33 AM)8baller Wrote: connect to the ecu directly using resistors and see if it can be read, if not then yes likely you have damaged ecu by using this adapter if you say it have 'wrong soldering' Thank you for your reply. I am not quite sure what you mean by connecting directly using resistors? (14-05-2019, 10:42 AM)blackTDI Wrote:I have read on bench by Kess, before I tried to unlock.(14-05-2019, 09:02 AM)Willinickersen Wrote: I got the message "communication problem" in kess, Fgtech and VCP PRO. Have only tried to unlock with the one adapter "simos PC2.1 unlock" from the 22 piece adapter kit I've bought with the stainless steel BDM Frame. After this didn't work, I checked the adapter, and there is some totally wrong soldering.... I have bought another ECU with same part number, same HW number Back to basic....account reset to 2018
Learning by reading, learning by doing, learning by experience |
|||
15-05-2019, 10:42 AM,
Post: #16
|
|||
|
|||
RE: Simos PC2.1 communication error
I
(15-05-2019, 06:55 AM)Willinickersen Wrote:(14-05-2019, 09:33 AM)8baller Wrote: connect to the ecu directly using resistors and see if it can be read, if not then yes likely you have damaged ecu by using this adapter if you say it have 'wrong soldering' Post the bdm read that u did here, maybe u locked ecu writing bad file. With new ecu u need adapting to car and storing keys, I think that VAS can do the job or VCP too but not sure.. |
|||
15-05-2019, 11:53 AM,
Post: #17
|
|||
|
|||
RE: Simos PC2.1 communication error
I'm not sure if you have read what I've wrote @blackTDI...I haven't written anything to the ECU.....
Back to basic....account reset to 2018
Learning by reading, learning by doing, learning by experience |
|||
16-05-2019, 10:56 AM,
(This post was last modified: 16-05-2019, 20:30 PM by Willinickersen.)
Post: #18
|
|||
|
|||
RE: Simos PC2.1 communication error
(15-05-2019, 10:42 AM)blackTDI Wrote: I(15-05-2019, 06:55 AM)Willinickersen Wrote:(14-05-2019, 09:33 AM)8baller Wrote: connect to the ecu directly using resistors and see if it can be read, if not then yes likely you have damaged ecu by using this adapter if you say it have 'wrong soldering' I have fixed this problem, tried to backup the old ECU with ktag, and an new unlock adapter... This worked! Back to basic....account reset to 2018
Learning by reading, learning by doing, learning by experience |
|||
08-09-2022, 12:01 PM,
Post: #19
|
|||
|
|||
RE: Simos PC2.1 communication error
Willinickersen this restore bricked ecu?
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ERROR ems3155 NISSAN JUKE | mouss35500 | 0 | 22 |
7 hours ago Last Post: mouss35500 |
|
Edc17c10 security access error | al70 | 3 | 109 |
19-04-2024, 13:04 PM Last Post: bboctavian |
|
AUDI S4 2015 continental simos 8.5 dtc off | aboelgood | 2 | 71 |
18-04-2024, 15:21 PM Last Post: aboelgood |
|
Mazda CX-7 need ecu eep Adblue error removed | joshturk | 4 | 202 |
01-04-2024, 07:02 AM Last Post: joshturk |
|
A3 1.8tfsi Flaps Error Delete | jenny123 | 3 | 196 |
19-03-2024, 13:44 PM Last Post: Jurebv |
|
Help error Ford Mondeo V 20tdci Delphi DCM61 | bmw320d | 2 | 112 |
18-03-2024, 18:42 PM Last Post: bmw320d |
|
Simos 3 29f400 dtc off and checksum | meszol | 1 | 104 |
16-03-2024, 18:30 PM Last Post: mariux0510 |
|
Audi a3 8L 1.6 petrol simos 3 dtc off | meszol | 5 | 219 |
15-03-2024, 13:15 PM Last Post: meszol |
|
simos 18.2 dtc delete | BoNzO | 1 | 102 |
15-03-2024, 09:17 AM Last Post: loki954 |
|
vw polo dtc off simos 9.1 p0420 p2096 p1250 | dleer2007 | 1 | 101 |
14-03-2024, 18:22 PM Last Post: iori974 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content