[DieStream]

A Groupmate get a flash to the latest CIC Firmware.
I flash 62, 63, A0 successful.
His CIC don’t take the ZUSB 9283418 for ECE.
This CIC get the ZUSB 9283427 for Chinese.

He says that’s the original CIC and his car was produced in Germany with ECE.

VIN: A378318

[Beard]

Hello.
Correct order of addresses for CIC: 63, 62, A0.

Do everything in expert mode!!! on the example of 41 version date.

Should it be raised? Then rewrite the last date.

The update must be done module by module.
The correct order is 63, 62, A0. All modules can be flashed using MOST_ASYNC_ab625.

Download the attached package and extract it. CIC has three modules: 63, 62 and A0.
63 and A0 are the same for all chassis models,
so there is only one folder for each folder.
62 (gateway) has different software for each chassis model,
so you need to select the correct folder.
Chassis models are E60 (including E60, E61, E62, E63), E89 (including E8x and E9x) and E70 (including E70 and E71).
Choose the correct folder for 62.

Copy three folders (develop_63, develop_62_exx, develop_a0) to c:\ec-apps\nfs\data.

There are three modules for firmware. 63 is the first.
Go to c:\ec-apps\nfs\data folder and rename "Develop_63" to "Develop".

63:

- configure ICOM for MOST_ASYNC_ab625
-Open WinKFP -Select
expert mode
-PABD = 08010408CI 63F1.ipo (be careful not to select C M 63)
-P-SGBD = 33CI 63 F1_10.prg (be careful not to select C M 63)
-ECU address=63
-data=A9257174
-program=9257170
- NAAB = H020270_0202J5

WinKFP will complain about bad files and other things
when you select files, just ignore the complaints.


Now select done and you will return to the main menu.
Now everything is ready for the flash
(also you have power supply connected, ignition on and CD/DVD removed from CIC).
For now, you can enable the Windows Task Manager (taskmgr.exe),
because WinKFP progress bar won't work when flashing cic,
Select "NAAB Program" and the flash loader will start.
The CIC goes into bootloader mode and the fan spins at full speed, this is normal.
The screen shows the bootloader image or turns black,
depending on the old firmware version.
Now you have to be patient because the counter is not working.
It will reach 100% and do everything, just wait,
until "boot sector update completed" appears.
Next, select the program of the program. Same precautions:
The firmware update takes about 30 minutes.
After completing the program programming, select the program data.

62:

You now have firmware 63. Then you must flash 62.
Go to c:\ec-apps\nfs\data and delete the develop folder.
Then rename Develop_62_exx for development. Return to the list at 63:on this guide.
Set up WinKFP the same way as in this list, except change the three bold 63s to 62.
Also select new NAAB data, programs and files.
If you did the folder exchange correctly
(delete the development folder, rename Develop_62_exx -> Develop) then only the correct files will be available.
Select "Finish" and flash in the same order: (F 3) NAAB, (F 4) program, (F 5) data.
62 flashes pretty fast, maybe five minutes for each part.

A0:

Now you know how to do it.
The only difference is that A0 only has a program, not data or NAAB.
Delete the old development folder, rename Develop_a0 for development.
Back to the list again at 63 in this tutorial, change the three bold 63s to A0.
In this module, you cannot select data or NAAB, just select a program,
and then select done.
Select a program program. Programming A0 takes about 30 minutes.
After that you have reprogrammed your CIC to v41 and you will get BMW Apps without FSC.
Develop_62_e60
9257181A.0pa
9257181A.0pb
A 9257182.0da
H 020280_0202J6.0ba
***********************************
Develop_62_e70
9257181A.0pa
9257181A.0pb
A 9257184.0da
H 020280_0202J6.0ba
***********************************
Develop_62_e89
9257181A.0pa
9257181A.0pb
A 9257183.0da
H 020280_0202J6.0ba
************************************
Develop_A0
9257185A.0pa
9257185A.0pb

[DieStream]

Hello.
Correct order of addresses for CIC: 63, 62, A0.

I edit the order, but it how can be a Asian firmware on a ece cic.

[Beard]

$ PS10INIT N00000000000000000000000020000000000000 D
$ VERSIONKFCONF: kfconf10.dat
;Zusbauvorschrift vom 01.09.2021 18:44
;SG-TYP: CI63F1
;ZB-NR  TYP-NR  HW-NR  IX SW-NR     AM          PIN S CS
9283425,0000000,9283424,A,9283425DA,0FFFFFFFFFD,000,1 S
9283418,0000000,9283417,A,9283421DA,0FFFFFFFFFD,000,1 W
***************---------------------------******************
                         
9283419,0000000,9283417,A,9283421DA,0FFFFFFFFFD,000,1 Z
9283420,0000000,9283417,A,9283421DA,0FFFFFFFFFD,000,1 9
9283423,0000000,9283422,A,9283423DA,0FFFFFFFFFD,000,1 A
9283427,0000000,9283426,A,9283427DA,0FFFFFFFFFD,000,1 A
***************---------------------------******************

This is the answer to your question!