Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Belt force limiter, driver: resistance too high
22-09-2022, 02:36 AM,
Post: #1
Belt force limiter, driver: resistance too high
Hi Guys,

I have a 2015 650i which has error 930934 Belt force limiter, driver: resistance too high.

THe car was in a collision and the seat belts were replaced but restraint system failure is still on the dash.

Does anyone know how to fix this?

I tried ressetting the ACSM module and clearing codes but light doesn't go away.
Quote this message in a reply
22-09-2022, 21:12 PM,
Post: #2
1All Data  RE: Belt force limiter, driver: resistance too high
Belt force limiter is not the seat belt itself but the seat belt buckle wink If you replaced it also check the wiring plug for brocken tabs.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  G30 LCI Headlights retrofit: High Beam Laser light locking active tcp443 19 3,216 26-03-2024, 21:25 PM
Last Post: Satia
XZBMW G20 Speed Limiter? bmchicago 1 109 06-03-2024, 18:37 PM
Last Post: Node
XZBMW F11 Champ2 to Cic high retrofit help? d3lete 3 135 03-03-2024, 20:51 PM
Last Post: Thorsten
XZBMW Neet help to flash ZGW-02 High for E91 LCI NBT EVO retrofit emaflo1978 3 300 16-02-2024, 21:15 PM
Last Post: emaflo1978
  G31 high beam assistant FSC claw 6 348 16-02-2024, 16:25 PM
Last Post: pcp1234
  G01 disable Seat Belt Tightening after drive away BusyBox 5 377 13-02-2024, 13:03 PM
Last Post: BusyBox
XZBMW F32 High Beam problem - USA Car, EU Headlight BawariaCars 4 277 04-02-2024, 08:00 AM
Last Post: kklobo
XZBMW Retrofit High-Beam-Asisst on F40 / G-Series Airbus 5 446 29-01-2024, 21:19 PM
Last Post: OBDSolutions
  How to code hands free driver assistant (G-series) btvaleks 20 4,945 17-01-2024, 14:16 PM
Last Post: ChrisF30
  F01 High beam assist failure claw 6 362 02-01-2024, 09:09 AM
Last Post: George_83

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content