[ikrom]

Hi there

Here's Audi A6 2012 immo5 (ecu-tcu-bcm2 immo) with dsg dl501 gen2 0b5 changed.
Now car starts, but in dash SAFE and writing 
"stop the car put to "P" and switch off engine" and gearbox not selecting , can't drive.
Because gearbox was burned, and changed to another one. Now need to adapt tcu immo with bcm2.

So BCM2 immo data copy to -> tcu immo.

Here attached full read from bcm2 & full read from tcu.

Thanks !

UPD :
a6 gearbox DL501gen2_0b5.rar - is new tcu full read (now installed)

old ori gearbox.rar - is old own car tcu (burned).

[fizan]

WRITE FILE AND TELL ME

[ikrom]

WRITE FILE AND TELL ME

Not work. Not selecting gearbox. Still safe

[fizan]

maybe genration problem

if you have orignal tcm data send me

orignal or donor TCM both data send me


but need same genration

thank you

[jokir]

Attach the synchronization data from the key

[aspy39]

Have you not got access to someone with Odis adapt immo and then flash to correct software

[lupu_sandu]

Read and post sync data from working key (vvdi2 read).
Without that will be impossible to adapt

[ikrom]

tomorrow will have old tcu module. also can read synch data from working key.

[ikrom]

Here is ori old tcu full read...

also first post updated - added ori own car tcu file

[16eddi67]

Hier you dump prepair for cloning ..........


BR EDDY