[georgedigital]

Hi to all members.

I have a big problem with Mini Cooper s R53 2006.
Someone tried to make a new key and deleted the EWS. I wrote a new file with new keys but car don't crank.
Trying to sync EWS and EMS with no luck...
Trying to make immo off and no luck....
Can someone check my files and sync or make immo off?
Ecu is EMS5150 S122237006B
EWS4.3 2l86d

[AZCKNCLLC]

how did you read the ems5150? software does not recognize the vin or isn from your reading. In my experience, 29f400 chip must be removed and read out of circuit to get a proper reading from ems5150.


here i will attach ews4.3 eeprom and ems5150 good readings i have taken recently so that you can compare or you can write to your modules, program new key and test on the car.

[georgedigital]

how did you read the ems5150? software does not recognize the vin or isn from your reading. In my experience, 29f400 chip must be removed and read out of circuit to get a proper reading from ems5150.


here i will attach ews4.3 eeprom and ems5150 good readings i have taken recently so that you can compare or you can write to your modules, program new key and test on the car.

I have read with external programmer.Which software are you using to read isn and vin of ems5150?

---

how did you read the ems5150? software does not recognize the vin or isn from your reading. In my experience, 29f400 chip must be removed and read out of circuit to get a proper reading from ems5150.


here i will attach ews4.3 eeprom and ems5150 good readings i have taken recently so that you can compare or you can write to your modules, program new key and test on the car.

Your EMS dump is immo off.Have you test it and car start?

[georgedigital]

how did you read the ems5150? software does not recognize the vin or isn from your reading. In my experience, 29f400 chip must be removed and read out of circuit to get a proper reading from ems5150.


here i will attach ews4.3 eeprom and ems5150 good readings i have taken recently so that you can compare or you can write to your modules, program new key and test on the car.

Not work my friend...Still no crank and fail to sync.Thanks for your help!

[AZCKNCLLC]

how did you read the ems5150? software does not recognize the vin or isn from your reading. In my experience, 29f400 chip must be removed and read out of circuit to get a proper reading from ems5150.


here i will attach ews4.3 eeprom and ems5150 good readings i have taken recently so that you can compare or you can write to your modules, program new key and test on the car.

Not work my friend...Still no crank and fail to sync.Thanks for your help!

Are you removing the 29f400 to read and write? That's the only way I've been successful.

[georgedigital]

Yes remove and read/write with TL866

[georgedigital]

Solved!I replaced with EWS3 adding keys, matching isn and vin, resync with EMS and car working like a charm!!!