Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ BMW F20 116d error 2AB200 sensor pressure DME
14-09-2022, 23:02 PM,
Post: #1
|
|||
|
|||
BMW F20 116d error 2AB200 sensor pressure DME
Hello have a BMW F20 with error 2AB200, atmosferic sensor pressure inside DME plausible.
Ista says replace DME. Its possible repair or need replace/clone used. Thanks |
|||
15-09-2022, 07:24 AM,
Post: #2
|
|||
|
|||
RE: BMW F20 116d error 2AB200 sensor pressure DME
hi, what pressure values do you see in ISTA?
|
|||
15-09-2022, 07:37 AM,
Post: #3
|
|||
|
|||
RE: BMW F20 116d error 2AB200 sensor pressure DME
You can open DME and replace sensor (solder old one out and new one in). Did that couple of times. Those usually can be bought from china or from some reputable electronic components dealer.
ISTA says replace DME because dealers are not supposed to be doing that (opening DMEs and soldering something). |
|||
15-09-2022, 08:01 AM,
Post: #4
|
|||
|
|||
RE: BMW F20 116d error 2AB200 sensor pressure DME
(15-09-2022, 07:37 AM)Node Wrote: You can open DME and replace sensor (solder old one out and new one in). Did that couple of times. Those usually can be bought from china or from some reputable electronic components dealer. do you know where to buy the sensor? Thanks |
|||
15-09-2022, 08:18 AM,
Post: #5
|
|||
|
|||
RE: BMW F20 116d error 2AB200 sensor pressure DME
I've seen at least 3 different sensors. And did too few to guarantee that you have a particular one. Open DME and look for yourself. Usually, they are clearly seen as quite big "chip" WITH HOLES to let air in, with about 8 "legs". Then go from there.
I guess it could be Bosch SMD284, but you REALLY need to verify that. P.S. I bought it from this link, but it was 3 years ago, so there may be better sources now. Back then it was either china or this. And this seemed to be reputable compared to china. Shipped, however, through that STUPID global shipping crap . |