[moiloon]

ive got a 6J 2011 seat ibiza, boot lock now wont unlock/lock via internal button nor the keyfob, i hear no attempt from the mechanism to try, so bought new lock mechanism, still same issue, must use the emergency manual release inside boot, ,checked all fuses , all are fine, i am getting 12v at pins 1+2 at the latch 4 pin electrical connector plug, any advice what if any voltage should be at 3 and 4?, and i get 11v at the 2 pin handle electrical connector, should that also be 12v??, also with handle removed the microswitch seems to be clicking ect as normal, or where if any are common areas of possible broken wire?

EDIT- solved, was a broken wire in the black block connector at left hand side of the tailgate harness which goes to the handle

thanks