ATTENTION !! Users which have not any posts were deleted !
  1. File Service

  2. MOD-FILES

  3. Powerlab

  4. HEXPROG



PCMFLASH Questions/Answers
23-06-2020, 12:31 PM, (This post was last modified: 23-06-2020, 12:33 PM by ROD-BENDERS.)
Post: #31
RE: PCMFLASH Questions/Answers
What ecu type and why you use powerbox with scanmatik 2 pro ?

I assume you are using module 71.

Original tools or Ktm Bench dongle ?

cheers

ALL VAG ECU/BCM control units CS-MAC - CLONE/DATA EXTRACTION here: bowtime skype:  PM
For tuning Files I would ask  * Zenter Performance tuning yes * Remap Ross tuning  yes * Vision diesel tuning  yes   * Loki954 performance tuning yes bow
Quote this message in a reply
[-] The following 1 user says Thank You to ROD-BENDERS for this post:
  • volavka
23-06-2020, 12:41 PM, (This post was last modified: 23-06-2020, 12:41 PM by volavka.)
Post: #32
RE: PCMFLASH Questions/Answers
(23-06-2020, 12:16 PM)atomantmk Wrote:  I have try more times to read the VAG ECU's with PCMFlash but no success, I'm doing something wrong but I don't know what?
From hardware I have Scanmatik 2 Pro and PowerBox for PCMFlash.
Is it possible GPT1 and GPT2 to be a problem because when I do identification always show failure!
I have and GPT cable 14P600KT06 if can that help?
Can someone to explain me about connections and some other tricks?

does LED turns on in db25 adapter during read attempt ? 

Br.V

.

BEST CHIPTUNING SERVICE BY Zenter Performance  yes
Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
-----------------------------------------------------------------------------------------------------------------
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   yes 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS

-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty handsmechanic   are a sign of clean money  cash
Visit this user's website
Quote this message in a reply
23-06-2020, 12:49 PM,
Post: #33
RE: PCMFLASH Questions/Answers
I have only one LED on Scanmatik 2 Pro and it's always red when is cable connected and when I'm trying to read goes green and blink a short time.
Quote this message in a reply
25-06-2020, 17:08 PM, (This post was last modified: 25-06-2020, 17:11 PM by volavka.)
Post: #34
RE: PCMFLASH Questions/Answers
(23-06-2020, 12:49 PM)atomantmk Wrote:  I have only one LED on Scanmatik 2 Pro and it's always red when is cable connected and when I'm trying to read goes green and blink a short time.

Scanmatik 2 Pro has no problem in this case
i assume the mosfet transistor in db25 adapter burned
Try replace  a new one from aliexpress

Regards

BEST CHIPTUNING SERVICE BY Zenter Performance  yes
Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
-----------------------------------------------------------------------------------------------------------------
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   yes 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS

-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty handsmechanic   are a sign of clean money  cash
Reputation: +1 - atomantmk [+1]
Visit this user's website
Quote this message in a reply
[-] The following 3 users say Thank You to volavka for this post:
  • atomantmk, ROD-BENDERS, zbudo
28-06-2020, 20:53 PM,
Post: #35
RE: PCMFLASH Questions/Answers
(23-06-2020, 12:31 PM)ROD-BENDERS Wrote:  What ecu type and why you use powerbox with scanmatik 2 pro ?

I assume you are using module 71.

Original tools or Ktm Bench dongle ?

cheers
I have original, no clones!

(25-06-2020, 17:08 PM)volavka Wrote:  
(23-06-2020, 12:49 PM)atomantmk Wrote:  I have only one LED on Scanmatik 2 Pro and it's always red when is cable connected and when I'm trying to read goes green and blink a short time.

Scanmatik 2 Pro has no problem in this case
i assume the mosfet transistor in db25 adapter burned
Try replace  a new one from aliexpress

Regards
Connecting to one ECU something was burn inside, it could be this transistor.
With BitBox I have read Mercedes Delphi CRD.11 without a problem but I'll check this transistor.
Thanks for the tip!
Quote this message in a reply
29-06-2020, 10:21 AM,
Post: #36
RE: PCMFLASH Questions/Answers
Yes, transistor is the problem, IR F7240 it's burned!
Quote this message in a reply
29-06-2020, 10:24 AM, (This post was last modified: 29-06-2020, 10:26 AM by paja.)
Post: #37
RE: PCMFLASH Questions/Answers
Hi I have module 50 tested obd on Tatricx openpotr, pass.bosch kts works well, now purchased module 53 I will test, I want to buy module71must Scarmatic2 have to be purchased for this module? Thank you for your advice P.

Has anyone tested module 71 with another device?
Quote this message in a reply
29-06-2020, 13:37 PM, (This post was last modified: 29-06-2020, 13:41 PM by volavka.)
Post: #38
RE: PCMFLASH Questions/Answers
(29-06-2020, 10:24 AM)paja Wrote:  Hi I have module 50 tested obd on Tatricx openpotr, pass.bosch kts works well, now purchased module 53 I will test, I want to buy module71must Scarmatic2 have to be purchased for this module? Thank you for your advice P.

Has anyone tested module 71 with another device?

For module 71 need scanmatik 2 pro device 
BTW better when you ask for Cable for module 71 ask the seller to send you version 3 as is improved than older version 
i ordered new cable v3 from https://ecutools.eu/

BEST CHIPTUNING SERVICE BY Zenter Performance  yes
Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
-----------------------------------------------------------------------------------------------------------------
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   yes 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS

-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty handsmechanic   are a sign of clean money  cash
Reputation: +1 - loki954 [+1]
Visit this user's website
Quote this message in a reply
[-] The following 2 users say Thank You to volavka for this post:
  • loki954, paja
30-06-2020, 07:18 AM,
Post: #39
RE: PCMFLASH Questions/Answers
Not sure if you solved your problem but i had this problem and it was down to can high can lo wrong on diagram or it may have been gpt 1 & 2 opposite i cant remember. No hardware problems or software it was just wrong layout. Took me ages to solve and it was pretty simple. I had wrote a note to myself for future reference if you need them
Quote this message in a reply
[-] The following 1 user says Thank You to adz0101 for this post:
  • ROD-BENDERS
30-06-2020, 18:54 PM, (This post was last modified: 30-06-2020, 18:55 PM by volavka.)
Post: #40
RE: PCMFLASH Questions/Answers
New SW contain all help doc for PCMFLASH Users By dani happy


Attached Files Thumbnail(s)
   

BEST CHIPTUNING SERVICE BY Zenter Performance  yes
Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
-----------------------------------------------------------------------------------------------------------------
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   yes 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS

-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty handsmechanic   are a sign of clean money  cash
Reputation: +4 - ROD-BENDERS [+1] , loki954 [+1] , danyguit2000 [+1] , raffy haddad [+1]
Visit this user's website
Quote this message in a reply
[-] The following 7 users say Thank You to volavka for this post:
  • atomantmk, danyguit2000, loki954, raffy haddad, ROD-BENDERS, sascha965, theone


Possibly Related Threads…
Thread Author Replies Views Last Post
  pcmflash dsg module 58 questions JorBo 5 313 18-09-2020, 10:31 AM
Last Post: Ghitab
XZBMW After remap PCMFlash pass TÜV ? bemek01 6 798 29-06-2020, 08:10 AM
Last Post: Jurebv
XZBMW E60 525d stage 2 309 hp over 600 Nm questions florinu 4 839 20-06-2020, 18:21 PM
Last Post: Jurebv
YTMercedes [Question] How to read EDC17CP01 with PCMFlash atomantmk 8 1,321 07-03-2020, 17:59 PM
Last Post: Sergiy
0Immo CHINA KESS/KTAG , UPGRADE Questions Mshumacher 1 1,226 26-02-2020, 23:25 PM
Last Post: spanner_monkee
  PCMFlash satria_wr 36 13,767 31-12-2019, 22:29 PM
Last Post: atomantmk
  A few questions on BKD engine walshy155 2 689 14-12-2019, 00:36 AM
Last Post: golf110
  DCM3.7 PCMFlash problems sandor1987 0 765 05-05-2019, 08:47 AM
Last Post: sandor1987
ZVW Beginner Questions :-) Screwdrivekiller 5 734 05-04-2019, 23:01 PM
Last Post: Remap Ross
  pcmflash can work in vcm2 chong5195 0 627 20-09-2018, 17:10 PM
Last Post: chong5195

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content