Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
14-05-2015, 06:43 AM, (This post was last modified: 10-06-2015, 18:50 PM by fantomel.)
Post: #1
FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
Hi, after talking with some friends and looking on different forums, searching, i have managed to make a more proper interface with these changes. Changes made are also explained a little so that anyone can understand.

Please make zoom on picture to have a closer look
Keep in mind to use good components from companys like ST MICROELECTRONICS, NXP and OMRON and not some low ones.

[Image: fnuuc3.jpg]

Also since i was searching around, i have found different fixes in different forums but no one explained if it is for tool 0386 or 0475 so i have gathered all of them, tested on my 0475 tool and with the help of a friend that has 0386 tool you will find my conclusion explained and if you want to have a look at it i have added inside a little program hexcmp to compare it yourself.

Also looking around in all the fixes i have found that ept file are in fact 2 models, i have attached them both and in a txt file you will find the difference.

P.S. For those that have china v54 0386 you have some missing pieces compared to this one for example below big relays, if you want to have a closer look at this board i have posted HERE some more detailed pictures to see the little smd and so on.


Attached Files
fgtech fixes by fantomel explained.txt
File Type: .txt
Downloaded: 970 times
Size: 97 bytes


If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Reputation: +15 - volavka [+2] , carpi [+1] , banoo [+1] , eudin77 [+1] , ivica21 [+1] , istvan31 [+1] , mista [+1] , qwertyuiop12 [+1] , hamzettin [+1] , karmazyn [+1] , JarsaR [+1] , ROD-BENDERS [+1] , ToMiBoY [+1] , blackTDI [+1]
Quote this message in a reply
[+] 123 users say Thank You to fantomel for this post
09-06-2015, 17:14 PM,
Post: #2
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
Thnx for the manual. The link is not workingsad
Quote this message in a reply
10-06-2015, 18:51 PM, (This post was last modified: 11-06-2015, 07:05 AM by fantomel.)
Post: #3
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
Link working again.

How to read your firmware 0386 or 0475

Use any usb ttl adapter, the ones with pl2303 are prefered.
You can read it with philips software or with flashmagic(that can test crp level). Baud rate from 4800 to 19200, if you get blocked with connection error reconnect galletto to usb with jumper on and try again at another speed. Do not forget to put crystal in LPC2000 to 16000 and in flashMagic to 16 Mhz.

LPC2000 is the old program for Philips (actual NXP) 2XXX ..... series.Also put mark on LPC2000 for dts /rds and after push chip id like this software will detect chip auto and will choose 2119 . Look at the movie posted there.


Attached Files Thumbnail(s)
   
NXP SOFTWARE.txt
File Type: .txt
Downloaded: 619 times
Size: 151 bytes


If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Reputation: +12 - banoo [+1] , ivica21 [+1] , hbalazs [+1] , giiintas [+1] , txalkie [+1] , hamzettin [+1] , Tand [+1] , karmazyn [+1] , JarsaR [+1] , ToMiBoY [+1] , Unichip [+1] , tomushas [+1]
Quote this message in a reply
[+] 80 users say Thank You to fantomel for this post
11-06-2015, 16:37 PM,
Post: #4
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
Thanks alot! Great work.

Do you think a v52 clone can be transformed to v54 using this?

Also, where you say:

P.S. For those that have china v54 0386 you have some missing pieces compared to this one for example below big relays, if you want to have a closer look at this board i have posted HERE some more detailed pictures to see the little smd and so on.

The link referred to "HERE" is missing.

Regards
Quote this message in a reply
11-06-2015, 17:40 PM,
Post: #5
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
(10-06-2015, 18:51 PM)fantomel Wrote:  Link working again.

How to read your firmware 0386 or 0475

Use any usb ttl adapter, the ones with pl2303 are prefered.
You can read it with philips software or with flashmagic(that can test crp level). Baud rate from 4800 to 19200, if you get blocked with connection error reconnect galletto to usb with jumper on and try again at another speed. Do not forget to put crystal in LPC2000 to 16000 and in flashMagic to 16 Mhz.

LPC2000 is the old program for Philips (actual NXP) 2XXX ..... series.Also put mark on LPC2000 for dts /rds and after push chip id like this software will detect chip auto and will choose 2119 . Look at the movie posted there.
Were you able to read? In the film ff ff ff are ff.
Quote this message in a reply
13-06-2015, 18:00 PM,
Post: #6
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
I have read mine 0475 and it works. My friend tested my dump to a 0386 tool and all went ok. So now i have all i need for mine smile.No more date back,no more win xp or lpc.dll or codes smile

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Reputation: +1 - Bimmeristi [+1]
Quote this message in a reply
[+] 14 users say Thank You to fantomel for this post
16-06-2015, 08:15 AM,
Post: #7
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
Please share that dump smile
Quote this message in a reply
16-06-2015, 10:20 AM,
Post: #8
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
(13-06-2015, 18:00 PM)fantomel Wrote:  I have read mine 0475 and it works. My friend tested my dump to a 0386 tool and all went ok. So now i have all i need for mine smile.No more date back,no more win xp or lpc.dll or codes smile

I also waiting programmer to test 0475 dump and better soft.

                                                               
Was I helpful? Please support my time and Hit [Image: tyl_add.png]  And [Image: postbit_reputation.gif] -button's.

NEW Trasdata 9 Master support Bosch SM(service mode) etc enjoy
Quote this message in a reply
[+] 2 users say Thank You to Bimmeristi for this post
07-07-2015, 01:10 AM,
Post: #9
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
Good work thumbsup thank you for this info.. does somewone have links to buy this full qality parts ?
Quote this message in a reply
09-07-2015, 23:38 PM,
Post: #10
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
" does somewone have links to buy this full qality parts ? "

Farnell, ELFA, Digikey
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW FGTech Galletto 4 V54 Clone Software Disk broken khalid68 2 369 22-10-2023, 14:04 PM
Last Post: khalid68
00Windows Galletto V54 0386 to 0475 help TIH 11 800 16-09-2023, 08:21 AM
Last Post: TIH
00Windows What tuning software and hardware SteelFK1 9 1,728 03-07-2023, 23:25 PM
Last Post: no_name
  sid208 psa clone hardware ronaldo2002 8 2,322 14-06-2023, 23:12 PM
Last Post: dimitar
XZBMW BMW EDC17CP45 GBT Hardware resistors mdlx 7 1,709 24-02-2023, 06:23 AM
Last Post: Amats
PCitroen FGTECH Galleto error Le-Mans 4 1,830 26-08-2022, 16:11 PM
Last Post: Le-Mans
  What is the difference EDC 17 ROMIKUS 1 637 07-08-2022, 22:20 PM
Last Post: decode_cz
  FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386 fantomel 108 80,446 05-04-2022, 09:04 AM
Last Post: PaToWrC
  FGtech v54 galleto win 10 software need Buszkin 4 1,434 04-02-2022, 17:42 PM
Last Post: bimkinas
  Fiat Sedici DPF and difference sensor off kumi 2 561 28-10-2019, 17:43 PM
Last Post: Bmw777

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content