[Elf11]

Thx for the help.
I found the "problem"

I dont press the button "HW-IDs from SVTactual"

After them, i can flash the BDC.

All FSCs are reject. Its enough, if i buy a repair fsc?

Provide vin can give you fsc repair package

Thx for ur work.

Here is the vin: WBAJC9104HG942017 

rep&thanks are welcome

[szok11]

The best case, then, is ISTA and icom, and to allow ISTA to repair the gate. I go through this programming every time.

[DieStream]

The best case, then, is ISTA and icom, and to allow ISTA to repair the gate. I go through this programming every time.

I work everytime with the icom next. eNET only for flashxcode.

But this dude had only eNET

[MOCKING_BIRD]

The best case, then, is ISTA and icom, and to allow ISTA to repair the gate. I go through this programming every time.

I work everytime with the icom next. eNET only for flashxcode.

But this dude had only eNET

15 years in bmw bussiness
Have all possible icoms-nano etc

I use only enet for flash on f and g series

[DieStream]

The best case, then, is ISTA and icom, and to allow ISTA to repair the gate. I go through this programming every time.

I work everytime with the icom next. eNET only for flashxcode.

But this dude had only eNET

15 years in bmw bussiness
Have all possible icoms-nano etc

I use only enet for flash on f and g series

I flash only with iCOM NEXT. I had no problems.

[DieStream]

Thx for the help.
I found the "problem"

I dont press the button "HW-IDs from SVTactual"

After them, i can flash the BDC.

All FSCs are reject. Its enough, if i buy a repair fsc?

Provide vin can give you fsc repair package

Thx for ur work.

Here is the vin: WBAJC9104HG942017 

rep&thanks are welcome

Do you have the FSC for G30 NBTEVO2 Component Protection active?

[Vias]

First of all this situation it’s not problem at cable. I think you use the same data for Ista and esys. So it’s problem only data, I know it))
If you not find solution to fix CP, I can help you.