[carmaxlt]

Hello, 


I have replaced BCM of Golf 7 because of water damage. I used the same part number as it was before. EEPROM was resoldered from original module. Everything works except my windows. If I try to open driver side window, passenger window opens. How can I solve the problem? I have tried to do coding and parameterization with odis but i get error module cant be used, need to replace with correct one.

Thanks for your help in advance.

[alexturbo]

Hello, 


I have replaced BCM of Golf 7 because of water damage. I used the same part number as it was before. EEPROM was resoldered from original module. Everything works except my windows. If I try to open driver side window, passenger window opens. How can I solve the problem? I have tried to do coding and parameterization with odis but i get error module cant be used, need to replace with correct one.

Thanks for your help in advance.

Hi,
why solder eeprom. If both bcm are the same, you can use VCDs to copy complete parameterization and copy coding.
If BCM with water damage no communication, then exchange new BCM via Odis online.

[leonfrrojito]

have you removed the component protection from it?

[carmaxlt]

Sorry my bad. It wasnt a bcm fault. Door control module coding was wrong.

[itssvinh]

Sorry my bad. It wasnt a bcm fault. Door control module coding was wrong.

you change gateway ??

[spacewalker]

you change gateway ??

he dont even know what he did exactly
look into that BCM and try to find EPP 
wasting time

[jlshugo]

it is so strange to open it...