Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E63 2006 fault 5DD0 5DD2 DSC
02-09-2022, 17:14 PM,
(This post was last modified: 02-09-2022, 17:20 PM by BimmerSLO.)
Post: #1
|
|||
|
|||
BMW E63 2006 fault 5DD0 5DD2 DSC
Hello
I am having issues activating a used DSC module on a 2006 M6. I winkfp flashed, ncs coded and initialized steering angle sensor. The only two faults I have are 5DD0 and 5DD2 for inlet and outlet ABS DSC valve calibration. The problem is when I make the DSC valve calibration with ISTA, it successfully calibrates the pressure sensors but always fails to calibrate the valves. Any help please? CBS are all reset to initial mileage. Coding E + F Modelles in near from Graz, Austria
Navigation map updates I-Step update CIC, NBT, NBT EVO Retrofit and remote coding |
|||
02-09-2022, 18:43 PM,
Post: #2
|
|||
|
|||
RE: BMW E63 2006 fault 5DD0 5DD2 DSC
The calibration kept failing because it was obviously loosing pressure during the test. Leak or air in the system.
|
|||
03-09-2022, 22:18 PM,
Post: #3
|
|||
|
|||
RE: BMW E63 2006 fault 5DD0 5DD2 DSC
this fault usually caused by wrong VIN in DSC or mismatch. check UIF for VIN, use Tool32 to write VIN
|
|||
02-10-2022, 09:12 AM,
Post: #4
|
|||
|
|||
RE: BMW E63 2006 fault 5DD0 5DD2 DSC
As above tool32 to put your VIN and after that you'll be able to finish job
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content