Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA Programming with ENET
04-10-2022, 21:44 PM,
Post: #1
XZBMW  ISTA Programming with ENET
Hi,

Throughout the years I have heard that ENET cable should not be used for car programming G series cars. Then again, they say the same thing about K/D-can cables for E series. Personally, I have made dozens of successful programming sessions with K/D-can cable on E series.

Also, I have read posts from people who have successfully updated whole integrations levels without any issues, but only warning about not to do that. Never actually seen a post about someone bricking their ECU's due to that.

Just wanted to get a feel on how you all look at that.

Thanks
Quote this message in a reply
04-10-2022, 22:14 PM,
Post: #2
RE: ISTA Programming with ENET
(04-10-2022, 21:44 PM)Raimo5 Wrote:  Hi,

Throughout the years I have heard that ENET cable should not be used for car programming G series cars. Then again, they say the same thing about K/D-can cables for E series. Personally, I have made dozens of successful programming sessions with K/D-can cable on E series.

Also, I have read posts from people who have successfully updated whole integrations levels without any issues, but only warning about not to do that. Never actually seen a post about someone bricking their ECU's due to that.

Just wanted to get a feel on how you all look at that.

Thanks
Enet works perfect for I, G and F series regarding flashing.... You have heard false information...
Kdcan in terms of flashing has been discussed multiple times.... is not safe...many bricked ecus at forum in the past... there are couple cables that are modified and can work...

I preffer to work with esys and enet cable.. full control of everything
Quote this message in a reply
[+] 1 user says Thank You to jaramillo for this post
04-10-2022, 22:22 PM,
Post: #3
RE: ISTA Programming with ENET
most of those clone K+Dcan usb cables have defective firmware.


Quote this message in a reply
[+] 1 user says Thank You to bmchicago for this post
04-10-2022, 22:39 PM, (This post was last modified: 04-10-2022, 22:40 PM by Raimo5.)
Post: #4
RE: ISTA Programming with ENET
(04-10-2022, 22:14 PM)jaramillo Wrote:  
(04-10-2022, 21:44 PM)Raimo5 Wrote:  Hi,

Throughout the years I have heard that ENET cable should not be used for car programming G series cars. Then again, they say the same thing about K/D-can cables for E series. Personally, I have made dozens of successful programming sessions with K/D-can cable on E series.

Also, I have read posts from people who have successfully updated whole integrations levels without any issues, but only warning about not to do that. Never actually seen a post about someone bricking their ECU's due to that.

Just wanted to get a feel on how you all look at that.

Thanks
Enet works perfect for I, G and F series regarding flashing.... You have heard false information...
Kdcan in terms of flashing has been discussed multiple times.... is not safe...many bricked ecus at forum in the past... there are couple cables that are modified and can work...

I preffer to work with esys and enet cable.. full control of everything

Thanks,

Of course, I also want to delve into ESYS as well, but currently I'm looking into upgrading my G11's I-level. Trying to get more experience under my belt as I move to more complex sets of software. I find that ISTA still has its place as a quick diagnostics and update platform.

Thanks.

(04-10-2022, 22:22 PM)bmchicago Wrote:  most of those clone K+Dcan usb cables have defective firmware.

I concur. Guess I was just lucky by getting a good K/D-can cable. Not even anything fancy. A €20 cable some 8 years ago.
Quote this message in a reply
23-10-2022, 19:44 PM,
Post: #5
RE: ISTA Programming with ENET
(04-10-2022, 22:14 PM)jaramillo Wrote:  I preffer to work with esys and enet cable.. full control of everything

True, except that e-Sys doesn't tell you which post-programming actions (ABLs) to run...
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA+ Licenserequest 4.45.30 B O S S 0 42 35 minutes ago
Last Post: B O S S
XZBMW ISTA+ 4.47.1x Install Files - MEGA shawnsheridan 12 1,299 3 hours ago
Last Post: shawnsheridan
  ista 4.46 Standalone kiranabc 84 10,509 5 hours ago
Last Post: kiranabc
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 97 11,602 Yesterday, 11:38 AM
Last Post: vld
XZBMW ISTA 4.47.1x I-LEVEL+OVERVIEW AutoExe3219 0 236 24-04-2024, 22:52 PM
Last Post: AutoExe3219
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,707 662,748 24-04-2024, 14:22 PM
Last Post: Sedoy
XZBMW [MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed hashtagmaster 61 18,374 21-04-2024, 22:17 PM
Last Post: grizzle
XZBMW ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40 maksymw 3 982 21-04-2024, 12:02 PM
Last Post: matigdy
XZBMW Update ISTA 4.39.20 SQLiteDBs Italian Language diman64 10 1,000 20-04-2024, 11:20 AM
Last Post: elettra19
XZBMW ISTA+ 4.45.3x Install Files - MEGA shawnsheridan 10 2,294 18-04-2024, 07:33 AM
Last Post: rocdeng

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content