Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xprog reflash to 5.51 atmega
10-12-2015, 07:28 AM,
Post: #41
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
Hi all again
i finally got to update my new xprog m v50 to v551 and i update it and got all authorization but i still have the same problem when i try to read motorola mcu it always say device silent timeout error but with serial eeprom like 24c01 and 93c66 and 93c46 it is working good read and write and verify is any one having the same problem ? can anyone help with this ? thanking you all in advance Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
10-12-2015, 14:08 PM,
Post: #42
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
I have two Xprog. One I programmed to 5.51, update went fine and works good. The other one I programmed the ATmega, program update went fine, but it wanted to update online. The serial # is 000000000000000000000. I changed the Atmega with a new one, programmed it again and absolutely the same thing happened. Then I copied the 24C04 from the good one, programmed the Atmega again, and it still doing the same thing. Any advice would be appreciated.
|
|||
10-12-2015, 15:28 PM,
Post: #43
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
Sorry to hear that and i wish i could help you but i am new in this job
i also have another xprog the first i bought and tried to make it work and update but it's absolotly dead that why i bought another one and from the begining it can read serial eeprom but not motorola mcu thats why i update it to 551 but stil the same problem i wish that if some one can advise how to make it read motorola Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
14-12-2015, 18:12 PM,
Post: #44
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
Hi all
Any help ? Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
14-12-2015, 18:25 PM,
Post: #45
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
Pcb rework...check your tool,compare it with full quality one or original and make it identical.buy full quality components no low one
|
|||
24-01-2016, 22:34 PM,
Post: #46
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
Some solutions .....
|
|||
26-03-2016, 16:02 PM,
Post: #47
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
Today I have reflashed my dead xprog 5.5.0 to 5.5.1 using xprog to xprog connection. I have so far tested it by reading motorola HC05 3D33J and was read successfully.I am happy.
|
|||
09-02-2017, 12:00 PM,
Post: #48
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
I tried to flash my xprog that said device silent. and i could not make it work until now. can somebody show me pinout for miniprog? thanks!
and i have a full backup of xprog m if i flash it on the xprog will it work? |
|||
09-02-2017, 14:47 PM,
Post: #49
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
Check your connection, configuration and make sure you erase atmega first
|
|||
09-03-2017, 20:41 PM,
Post: #50
|
|||
|
|||
RE: Xprog reflash to 5.51 atmega
Hi,
can anyone tell me how to connect beeprog+ to xprog and how to configure fuse for programming it ? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content