[mihaiti]

Hello, does anyone has an easy diag3 dump?
thx!

[justdiag]

there are multiple dumps, depends whitch one you need. You need official, generated eobd type, xdiag, diagzone, prodiag?

[mihaiti]

Hi, official or generated eobd type!
I have lost the original tablet that came with this connector!
Now i try to activate, tested already prodiag with no succes!
Thx!

[justdiag]

Official Bootloader to be used with any pro3s type firmware. Also latest at this date, 12.02 below.
Empty chip, flash bootloader, extract in your droid's apk path.... your sn\Diagnostic\Configure\Download\ DOWNLOAD.bin and ini files then from app do firmware fix to flash firmware.

[mihaiti]

I see that bootloader and flash is separated one is 64K+960k=1024k. Should i write the separately or combined in one file. I use stlink to read/write!
I read it again carrefouly and i understanded the procedure!

[justdiag]

write bootloader, it is alive your device then you can flash fw from app or you can combine bootloader then add download.bin into one file and flash but you take the risc to not proper initialise the specialised controller inside your device.

[mihaiti]

Just now i have tryed to :

flash only the bootloader, my device is making bad sounds and does not connect!
I also tried to flash the merged file bootloader+firmware and does the same thing!
the only thing that sounds ok is this bin from alonewolf!
The problem is that with this bin i cannot connect to eobd!

[warezhr]

If EasyDiag 3.0 clone then the original virgin bin wont work, need bin for clones, problem that happens is that bad clones do not remmember firmware.